Effect of carbon on microstructure and mechanical properties of TiZrNb 0.5 V 0.5 lightweight refractory high entropy alloy
Materials Science and Technology · 2026-02 · 42 (2) · 141-150
DOI: 10.1177/02670836241292554 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 23.10.2024. Verfasst von Zhongjie Hu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The single-phase body-centered cubic TiZrNb 0.5 V 0.5 lightweight refractory high entropy alloy exhibits good plasticity but poor strength. Therefore, C is added to this alloy to enhance its strength and improve its mechanical properties in this paper. The influence of varying C content on the microstructure, phase composition, and mechanical behavior of TiZrNb 0.5 V 0.5 C x RHEAs is investigated in detail. The results indicate that C addition leads to the dissolution of alloying dendrites and induces the formation of the FCC – MC carbides phase. The carbide volume fraction increases in proportion to the carbon content, thereby enhancing the alloy's yield strength and hardness. The yield strength increases by 36%, while the hardness increases by 39%. The physical parameters of the alloy are analyzed, which reveals that the introduction of C increases the alloy's electronegativity and atomic radius difference, thus promoting the formation of carbides.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Hu, Z., Zhuang, C., & Qin, G. (2026). Effect of carbon on microstructure and mechanical properties of TiZrNb 0.5 V 0.5 lightweight refractory high entropy alloy. Materials Science and Technology, 42(2), 141-150. https://doi.org/10.1177/02670836241292554
Vancouver
Hu Z, Zhuang C, Qin G. Effect of carbon on microstructure and mechanical properties of TiZrNb 0.5 V 0.5 lightweight refractory high entropy alloy. Materials Science and Technology. 2026;42(2):141-150. doi:10.1177/02670836241292554
BibTeX
@article{Hu2026,
author = {Hu, Zhongjie and Zhuang, Changling and Qin, Gang},
title = {Effect of carbon on microstructure and mechanical properties of TiZrNb 0.5 V 0.5 lightweight refractory high entropy alloy},
journal = {Materials Science and Technology},
year = {2026},
volume = {42},
number = {2},
pages = {141--150},
doi = {10.1177/02670836241292554}
}
EUVIMED