EUVIMEDEUVIMED entdecken
Crossref

Rotational Moulding of Expanded Polyethylene by Pellets

Shih-Jung Liu, Ching-Hsiung Yang

Cellular Polymers · 2000

DOI: 10.1177/026248930001900402 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Cellular Polymers, 2000. Verfasst von Shih-Jung Liu und 1 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An innovative method of rotational moulding expanded polyethylene by pellets was reported. Experiments were carried out in a laboratory scale uniaxial machine, which was capable of measuring in-mould air temperature in the cycle. The polymeric material used was linear low-density polyethylene. The foaming material used is endo-thermal chemical blowing agent. Before moulding, the polyethylene material and the chemical-foaming agent were first melt blended by a single-screw extruder and were then cut into pellets of 2-3 mm in diameter. Pellets were then dry-blended with pure LLDPE powder by a mixer for moulding. Characterization of moulded part properties was performed after moulding. An optical microscopy equipped with an image analysis system was also employed to determine the bubble distribution in foamed parts. The purpose of this study is to access the mouldability of rotational moulding expanded polyethylene by pellets, and to investigate how the foaming agent and processing conditions can influence the moulding process and the final product quality. It was found that the rotational moulding of expanded parts by pellets saves the cost of powder grinding as well as improves the impact property of moulded parts, but is counteracted by uneven inner surfaces.

Zitieren

APA

Liu, S., & Yang, C. (2000). Rotational Moulding of Expanded Polyethylene by Pellets. Cellular Polymers. https://doi.org/10.1177/026248930001900402

Vancouver

Liu S, Yang C. Rotational Moulding of Expanded Polyethylene by Pellets. Cellular Polymers. 2000. doi:10.1177/026248930001900402

BibTeX
@article{Liu2000,
  author = {Liu, Shih-Jung and Yang, Ching-Hsiung},
  title = {Rotational Moulding of Expanded Polyethylene by Pellets},
  journal = {Cellular Polymers},
  year = {2000},
  doi = {10.1177/026248930001900402}
}
Kostenlos starten →