EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanism of overburden movement control by in situ coal gangue slurry-grouted composite support beneath intermittent goaf zones

Wenyu Lv, Shibo Zhang, Panshi Xie, Chao Lyu, Yanpeng He, Deliang Fu, Sida Zhang, Rui Li, Yaqian Bai, Lei Gao, Ru You

Energy Exploration & Exploitation · 20.11.2026

DOI: 10.1177/01445987261507440 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Exploration & Exploitation, online erschienen am 20.11.2026. Verfasst von Wenyu Lv und 10 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Fund of China, Shaanxi Provincial Key Research and Development Program Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Repeated mining beneath shallow, closely spaced seams containing alternating goafs and residual pillars can impose renewed loading on the residual pillars and induce secondary overburden movement. This study investigates in situ gangue-slurry grouting, in which the slurry permeates and cements the caved gangue skeleton, forming a composite support. Panel 30105 at the Nanliang Coal Mine was examined through analytical modeling, physical similarity testing, and UDEC simulation. A corrected equivalent mining-height model accounts for pre-grouting settlement, effective slurry retention, gangue bulking and compaction, the residual roof gap, and composite-support compression; the main roof is represented as a beam on a Winkler foundation to quantify stiffness recovery. In the physical model, grouting reduced peak immediate- and main-roof displacements from 1.57 and 0.75 cm to 1.31 and 0.36 cm, respectively, and reduced the interlayer separation aperture from 0.82 to 0.28 cm. The maximum reduction in pillar stress concentration was 29.4%. UDEC predicted an 82.0% reduction in maximum displacement above the lower-seam goaf, reductions of 45–50% above the upper-seam goafs, and reductions of 57–62% at residual pillars. The composite support carried an average stress of 2.16 MPa, corresponding to a stress coefficient of 0.37. Grouting controls repeated-mining deformation by reducing residual movement space and recovering distributed goaf support, thereby redistributing overburden load from pillar-dominated bearing toward load sharing between the residual pillars and the composite support.

Förderung

  • the National Natural Science Fund of China
  • Shaanxi Provincial Key Research and Development Program Project

Zitieren

APA

Lv, W., Zhang, S., Xie, P., Lyu, C., He, Y., Fu, D., Zhang, S., Li, R., Bai, Y., Gao, L., & You, R. (2026). Mechanism of overburden movement control by in situ coal gangue slurry-grouted composite support beneath intermittent goaf zones. Energy Exploration & Exploitation. https://doi.org/10.1177/01445987261507440

Vancouver

Lv W, Zhang S, Xie P, Lyu C, He Y, Fu D, et al. Mechanism of overburden movement control by in situ coal gangue slurry-grouted composite support beneath intermittent goaf zones. Energy Exploration & Exploitation. 2026. doi:10.1177/01445987261507440

BibTeX
@article{Lv2026,
  author = {Lv, Wenyu and Zhang, Shibo and Xie, Panshi and Lyu, Chao and He, Yanpeng and Fu, Deliang and Zhang, Sida and Li, Rui and Bai, Yaqian and Gao, Lei and You, Ru},
  title = {Mechanism of overburden movement control by in situ coal gangue slurry-grouted composite support beneath intermittent goaf zones},
  journal = {Energy Exploration & Exploitation},
  year = {2026},
  doi = {10.1177/01445987261507440}
}
Kostenlos starten →