EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Experimental and thermal performance evaluation of a PCM-enhanced solar water heater with a spiral coil heat exchanger

Suleiman Ibrahim Mohammad, Asokan Vasudevan, Rustam Turakulov, I.B. Sapaev, Raghvendra Singh, Jasgurpreet Singh Chohan, Ripendeep Singh, Pardeep Singh Bains, Aseel Smerat, Iqbal Roshn

Energy Exploration & Exploitation · 03.08.2026

DOI: 10.1177/01445987261474184 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Exploration & Exploitation, online erschienen am 03.08.2026. Verfasst von Suleiman Ibrahim Mohammad und 9 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Latent heat thermal energy storage is an effective approach for enhancing the performance of solar water heating (SWH) systems by storing surplus thermal energy and delivering it during periods of low solar availability. In this study, the thermal performance of a solar water heater integrated with a phase change material (PCM) storage unit is experimentally investigated under real outdoor operating conditions. Paraffin wax is employed as the PCM, while water serves as the heat transfer fluid (HTF). Thermal energy is transferred from the solar collector to a spiral copper coil heat exchanger embedded within the PCM tank, enabling indirect heat exchange between the HTF and the storage medium. The charging and discharging processes were examined on clear-sky days by monitoring the temperature evolution of the PCM and HTF using a distributed thermocouple array. The effects of HTF inlet temperature and flow rate on the thermal response, energy storage capacity, and system efficiency were systematically analyzed. The results demonstrate that the PCM-based storage system significantly enhances the thermal performance of the solar water heater. At a representative HTF inlet temperature of 80°C, the charging and discharging efficiencies reached 78.2% and 61.1%, respectively, while higher inlet temperatures led to further efficiency enhancement. During the charging process, the PCM stored 2.8–3.0 MJ of thermal energy, depending on the operating conditions, confirming its substantial latent heat storage capacity. During discharge, up to 1.65 MJ of useful thermal energy was recovered over 45–50 min at an inlet water temperature of 25°C and a flow rate of 48 L/h. Overall, integrating a PCM-based storage unit with a spiral coil heat exchanger improves the energy storage capacity and thermal efficiency of SWH systems, thereby extending hot water availability beyond periods of solar radiation.

Zitieren

APA

Mohammad, S. I., Vasudevan, A., Turakulov, R., Sapaev, I., Singh, R., Chohan, J. S., Singh, R., Bains, P. S., Smerat, A., & Roshn, I. (2026). Experimental and thermal performance evaluation of a PCM-enhanced solar water heater with a spiral coil heat exchanger. Energy Exploration & Exploitation. https://doi.org/10.1177/01445987261474184

Vancouver

Mohammad SI, Vasudevan A, Turakulov R, Sapaev I, Singh R, Chohan JS, et al. Experimental and thermal performance evaluation of a PCM-enhanced solar water heater with a spiral coil heat exchanger. Energy Exploration & Exploitation. 2026. doi:10.1177/01445987261474184

BibTeX
@article{Mohammad2026,
  author = {Mohammad, Suleiman Ibrahim and Vasudevan, Asokan and Turakulov, Rustam and Sapaev, I.B. and Singh, Raghvendra and Chohan, Jasgurpreet Singh and Singh, Ripendeep and Bains, Pardeep Singh and Smerat, Aseel and Roshn, Iqbal},
  title = {Experimental and thermal performance evaluation of a PCM-enhanced solar water heater with a spiral coil heat exchanger},
  journal = {Energy Exploration & Exploitation},
  year = {2026},
  doi = {10.1177/01445987261474184}
}
Kostenlos starten →