Experimental investigation on rock-cutting behavior of oscillating disc cutters: Effects of kinematic parameters and energy consumption characteristics
Energy Exploration & Exploitation · 24.07.2026
DOI: 10.1177/01445987261471924 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Exploration & Exploitation, online erschienen am 24.07.2026. Verfasst von Xuesong Wang und 3 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Major Science and Technology Project of China.
Abstract (Originalsprache)
Oscillating disc cutter (ODC) represents a promising technique for hard rock excavation by combining the low thrust force requirement of chisel picks and the high wear resistance of conventional rolling disc cutters. To reveal the rock-breaking mechanism and quantify the effects of key kinematic parameters on cutting performance, a full-scale linear rock-cutting test rig with an oscillating module was developed. A series of cutting tests was performed on red sandstone under varied speed ratios ( R v) and cutting depths ( d ). Cutting responses, including thrust force, torque, specific energy (SE), particle size distribution, and effective crushing energy ratio, were systematically analyzed. With increasing R v, mean thrust force, mean torque, and SE increase monotonically, while crushing SE ( W ) decreases exponentially and tends to stabilize above a critical R v of approximately 0.5. The effective crushing energy ratio r E decreases linearly with rising R v owing to the enhanced friction loss and elevated cutting load. As cutting depth increases, both mean thrust force and mean torque increase linearly; meanwhile, SE and W decrease linearly due to the transition toward dominant brittle fracture and the increased proportion of large-size rock chips. These findings clarify the coupled effects of kinematic parameters on rock-cutting behavior and provide practical guidance for parameter optimization of ODC in hard rock tunneling and deep mining engineering.
Förderung
- National Major Science and Technology Project of China
Zitieren
APA
Wang, X., Wang, S., Li, X., & Meng, Q. (2026). Experimental investigation on rock-cutting behavior of oscillating disc cutters: Effects of kinematic parameters and energy consumption characteristics. Energy Exploration & Exploitation. https://doi.org/10.1177/01445987261471924
Vancouver
Wang X, Wang S, Li X, Meng Q. Experimental investigation on rock-cutting behavior of oscillating disc cutters: Effects of kinematic parameters and energy consumption characteristics. Energy Exploration & Exploitation. 2026. doi:10.1177/01445987261471924
BibTeX
@article{Wang2026,
author = {Wang, Xuesong and Wang, Shibo and Li, Xuefeng and Meng, Qingfeng},
title = {Experimental investigation on rock-cutting behavior of oscillating disc cutters: Effects of kinematic parameters and energy consumption characteristics},
journal = {Energy Exploration & Exploitation},
year = {2026},
doi = {10.1177/01445987261471924}
}
EUVIMED