EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Dual optimization of a stepped solar desalination system using porous black wool absorber under semi-arid climatic conditions

Suleiman Ibrahim Shelash Mohammad, Asokan Vasudevan, Zehraa S, Amit Ved, Hannah Jessie Rani R, Ashish Singh, Manish Sharma, IB Sapaev, Ali Foladi

Energy Exploration & Exploitation · 2026-07 · 44 (4) · 2444-2469

DOI: 10.1177/01445987261427135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Exploration & Exploitation, online erschienen am 02.03.2026. Verfasst von Suleiman Ibrahim Shelash Mohammad und 8 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Global freshwater scarcity, especially across arid regions such as Afghanistan, underscores the urgent need for sustainable and low-cost desalination technologies. Conventional solar distillation systems suffer from intrinsically low thermal efficiency and limited productivity. This study aimed to overcome these limitations by experimentally and analytically evaluating the performance enhancement achieved through integrating low-cost porous black wool insulation into the steps of a cascade solar still. A series of laboratory experiments were conducted under controlled clear-sky conditions, supported by quasi-dynamic thermal modeling and exergy analysis. The energy and exergy efficiencies were computed using validated thermodynamic relations, while an innovative cost-effectiveness index (CEI) was introduced to quantitatively assess the trade-off between thermal performance and economic feasibility. The results reveal a peak energy efficiency of 24.7% and an exergy efficiency of 4.35% for a thermodynamically optimal configuration at a thickness of 20 mm, representing a 7.08% improvement over an uninsulated baseline. However, the highest economic productivity, expressed by the maximum CEI of 0.49% /mm, was achieved at a thickness of 5 mm, identifying a critical divergence between thermal and economic optima. The novelty of this work lies in establishing a dual optimization pathway—thermal efficiency and cost-effectiveness—based on a material-thickness-dependent function validated by both experimentally and theoretically. These results provide a new, quantitative framework for sustainable design and scale-up of economically viable solar desalination systems.

Zitieren

APA

Mohammad, S. I. S., Vasudevan, A., S, Z., Ved, A., R, H. J. R., Singh, A., Sharma, M., Sapaev, I., & Foladi, A. (2026). Dual optimization of a stepped solar desalination system using porous black wool absorber under semi-arid climatic conditions. Energy Exploration & Exploitation, 44(4), 2444-2469. https://doi.org/10.1177/01445987261427135

Vancouver

Mohammad SIS, Vasudevan A, S Z, Ved A, R HJR, Singh A, et al. Dual optimization of a stepped solar desalination system using porous black wool absorber under semi-arid climatic conditions. Energy Exploration & Exploitation. 2026;44(4):2444-2469. doi:10.1177/01445987261427135

BibTeX
@article{Mohammad2026,
  author = {Mohammad, Suleiman Ibrahim Shelash and Vasudevan, Asokan and S, Zehraa and Ved, Amit and R, Hannah Jessie Rani and Singh, Ashish and Sharma, Manish and Sapaev, IB and Foladi, Ali},
  title = {Dual optimization of a stepped solar desalination system using porous black wool absorber under semi-arid climatic conditions},
  journal = {Energy Exploration & Exploitation},
  year = {2026},
  volume = {44},
  number = {4},
  pages = {2444--2469},
  doi = {10.1177/01445987261427135}
}
Kostenlos starten →