EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Heating and cooling supply estimation to control buildings temperature using resistor-capacitor thermal model, unscented kalman filter, and nonlinear least square method

Vahid Zamani iD, Shaghayegh Abtahi, Yong Li, Yuxiang Chen

Building Services Engineering Research and Technology · 2024-03 · 45 (2) · 135-160

DOI: 10.1177/01436244231221254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Building Services Engineering Research and Technology, online erschienen am 14.12.2023. Verfasst von Vahid Zamani und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Buildings can have varying heating and cooling set points to take advantage of favorable environmental conditions and low time-of-use rates. To optimize temperature scheduling and energy planning, building energy managements need reliable building thermal models and efficient estimation methods to accurately estimate space heating and cooling supply (or power demand) over a certain period (e.g., 24 h). This accurate estimation capability is vital for performing temperature control strategies. Therefore, the present study used resistor-capacitor (RC) models and unscented Kalman filter (UKF) integrated with nonlinear least square (NLS) to develop a method for precisely estimating heating and cooling supply to control zone temperature. To evaluate the capability of the method, two case studies are conducted. The first case study involves a made-up simple RC model, while the second case study uses monitored data from a single detached house in different scenarios. The capability of the method is evaluated by applying the estimated heating and cooling supply to the RC thermal model and simulated zone temperatures. Then, assess whether the controlled zone’s temperature meets the expected temperature or not. The performance evaluation shows that the developed method can accurately estimate the heating and cooling supply, validating its applicability to temperature control objectives. Practical Application This research provides a valuable contribution to modern building industry professionals by offering a precise method for estimating heating and cooling supply for temperature control in buildings. By equipping practitioners with an effective tool to optimize energy management, this study addresses a critical aspect of building performance. The practical case studies demonstrate the versatility and applicability of this approach in real-world scenarios. In a world increasingly prioritizing energy efficiency and sustainability, this research empowers professionals to make informed decisions, enhance building performance, and contribute to a greener and more sustainable future, all within a concise and actionable framework.

Schlagwörter

Stichwörter der Autor:innen

Building energy modelRC modelheating and cooling supply estimationnonlinear least squaretemperature controlunscented kalman filter

Autor:innen und Institutionen

  • Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada.

ORCID-Profile: Vahid Zamani

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Zamani, V., Abtahi, S., Li, Y., & Chen, Y. (2024). Heating and cooling supply estimation to control buildings temperature using resistor-capacitor thermal model, unscented kalman filter, and nonlinear least square method. Building Services Engineering Research and Technology, 45(2), 135-160. https://doi.org/10.1177/01436244231221254

Vancouver

Zamani V, Abtahi S, Li Y, Chen Y. Heating and cooling supply estimation to control buildings temperature using resistor-capacitor thermal model, unscented kalman filter, and nonlinear least square method. Building Services Engineering Research and Technology. 2024;45(2):135-160. doi:10.1177/01436244231221254

BibTeX
@article{Zamani2024,
  author = {Zamani, Vahid and Abtahi, Shaghayegh and Li, Yong and Chen, Yuxiang},
  title = {Heating and cooling supply estimation to control buildings temperature using resistor-capacitor thermal model, unscented kalman filter, and nonlinear least square method},
  journal = {Building Services Engineering Research and Technology},
  year = {2024},
  volume = {45},
  number = {2},
  pages = {135--160},
  doi = {10.1177/01436244231221254}
}
Kostenlos starten →