EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Demand response with heat pumps: Practical implementation of three different control options

Jenny Crawley, Adria Martin-Vilaseca iD, Jez Wingfield, Zachary Gill, Michelle Shipworth, Clifford Elwell

Building Services Engineering Research and Technology · 2023-03 · 44 (2) · 211-228

DOI: 10.1177/01436244221145871 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Building Services Engineering Research and Technology, online erschienen am 13.12.2022. Verfasst von Jenny Crawley und 5 weiteren Autor:innen. Beteiligte Einrichtung: UCL Energy Institute, University College London, London, UK. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, “la Caixa” Foundation, UK Research and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electrification of heating and transport and decarbonisation of supply creates a need for demand side flexibility to balance the grid. Heat pumps are expected to form a major part of heat delivery, and many modelling studies have investigated the technical potential of heat pump demand response. However, little empirical work has been reported on the practical implementation of such demand response in occupied homes. This paper presents a cross-case comparison of three early adopters of heat pump demand response in the UK. The aim was to reduce heat pump electricity consumption during the same peak period, but each employed a different control strategy: lowered air temperature setpoints, lowered flow temperature and blocked heat pump compressor. A 56–90% electricity reduction during the peak period was observed; the success of the demand response depended on how the control strategy affected the heat pump and the rest of the heating system. However, no one stakeholder is responsible for all these system components. The fabric, heating distribution and control system and heat pumps installed are highly heterogeneous across the stock, highlighting that flexibility mechanisms must be developed that can be tailored to or work across their range. Three case studies of different heat pump demand response control strategies in real homes are presented. All three households reduced their electricity consumption during a peak period but delivered unintended consequences where the heat pump’s logic did not correspond to the demand response requirements. This study highlights that the implementation of heat pump demand response to support electricity system operation requires a clear definition of electricity system need as well as practical demand response mechanisms to be integrated into heating system design.

Schlagwörter

Stichwörter der Autor:innen

Case studydemand responseempiricalflexibilityheat pumps

Autor:innen und Institutionen

  • UCL Energy Institute, University College London, London, UK.
  • SOAP Retrofit, Bristol, UK.

ORCID-Profile: Adria Martin-Vilaseca

Förderung

  • Engineering and Physical Sciences Research Council
  • “la Caixa” Foundation
  • UK Research and Innovation

Zitieren

APA

Crawley, J., Martin-Vilaseca, A., Wingfield, J., Gill, Z., Shipworth, M., & Elwell, C. (2023). Demand response with heat pumps: Practical implementation of three different control options. Building Services Engineering Research and Technology, 44(2), 211-228. https://doi.org/10.1177/01436244221145871

Vancouver

Crawley J, Martin-Vilaseca A, Wingfield J, Gill Z, Shipworth M, Elwell C. Demand response with heat pumps: Practical implementation of three different control options. Building Services Engineering Research and Technology. 2023;44(2):211-228. doi:10.1177/01436244221145871

BibTeX
@article{Crawley2023,
  author = {Crawley, Jenny and Martin-Vilaseca, Adria and Wingfield, Jez and Gill, Zachary and Shipworth, Michelle and Elwell, Clifford},
  title = {Demand response with heat pumps: Practical implementation of three different control options},
  journal = {Building Services Engineering Research and Technology},
  year = {2023},
  volume = {44},
  number = {2},
  pages = {211--228},
  doi = {10.1177/01436244221145871}
}
Kostenlos starten →