Remaining useful life prediction of high-speed rolling bearings based on multi-signal fusion
Transactions of the Institute of Measurement and Control · 2026-12 · 48 (16) · 5145-5158
DOI: 10.1177/01423312251411462 ↗Kurz gefasst
Fachartikel in der Zeitschrift Transactions of the Institute of Measurement and Control, online erschienen am 17.01.2026. Verfasst von Junning Li und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: Natural Science Basic Research Program of Shaanxi Province, education department of shaanxi province, national natural science foundation of china.
Abstract (Originalsprache)
Addressing the challenges of dividing the degradation states of rolling bearings in Remaining Useful Life (RUL) prediction, as well as the issues of prediction lag and low prediction accuracy resulting from manual experience judgments, a method of RUL prediction of high-speed rolling bearings based on multi-signal fusion is proposed in this manuscript. First, wavelet thresholding denoising is used to denoise the original vibration signals. Feature extraction is performed on denoised vibration signals and degradation features are selected which effectively characterize the degradation progression throughout the entire life cycle of rolling bearings. Second, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) cluster analysis is conducted on the degradation features. The purpose of this analysis is to derive the initial degradation point and failure point based on vibration signals. Subsequently, Finite Element Thermal Analysis (FETA) is performed on the temperature signals, aiming to identify the initial degradation point and fault point based on temperature information. The two sets of results are compared and analyzed to verify the effectiveness of the method, and then these results are integrated based on principal component analysis (PCA) to obtain the final stage division result. Finally, the Gray Wolf Optimization (GWO), Sparrow Search Algorithm (SSA), and Osprey Optimization Algorithm (OOA) are compared through test functions to select the optimal optimization algorithm SSA. Then, the hyperparameters of long short-term memory (LSTM) are optimized based on SSA, and the RUL prediction for bearings is conducted using the SSA-LSTM model. The result demonstrates that this method achieves optimal prediction accuracy, with RMSE and MAE reduced by 77.59% and 78.03%, respectively, compared to the unoptimized LSTM model.
Förderung
- Natural Science Basic Research Program of Shaanxi Province
- education department of shaanxi province
- national natural science foundation of china
Zitieren
APA
Li, J., Wang, Y., Bai, M., & Wen, J. (2026). Remaining useful life prediction of high-speed rolling bearings based on multi-signal fusion. Transactions of the Institute of Measurement and Control, 48(16), 5145-5158. https://doi.org/10.1177/01423312251411462
Vancouver
Li J, Wang Y, Bai M, Wen J. Remaining useful life prediction of high-speed rolling bearings based on multi-signal fusion. Transactions of the Institute of Measurement and Control. 2026;48(16):5145-5158. doi:10.1177/01423312251411462
BibTeX
@article{Li2026,
author = {Li, Junning and Wang, Yu’an and Bai, Mengsha and Wen, Jinpeng},
title = {Remaining useful life prediction of high-speed rolling bearings based on multi-signal fusion},
journal = {Transactions of the Institute of Measurement and Control},
year = {2026},
volume = {48},
number = {16},
pages = {5145--5158},
doi = {10.1177/01423312251411462}
}
EUVIMED