EUVIMEDEUVIMED entdecken
Crossref

Optimization of fly ash reinforcement in epoxy/polyester blended composites for improved thermo-mechanical performance

Anand Maurya, Pradeep Kumar, Brajesh Kumar, Ravish Singh Rajput, Vinay Kumar Singh

Journal of Elastomers & Plastics · 2026-08 · 58 (5) · 976-993

DOI: 10.1177/00952443261436655 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Elastomers & Plastics, online erschienen am 03.04.2026. Verfasst von Anand Maurya und 4 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study incorporated fly ash (FA), an industrial byproduct, into an epoxy-polyester (EP) hybrid matrix to develop composites with enhanced mechanical and thermal properties. Composites were fabricated and systematically studied with varying fly ash contents. The composite with 6 wt% FA (EPS6) exhibited the highest tensile strength of 37.09 MPa, which was 72% higher than that of pure EP. Furthermore, the maximum flexural strength at 6 wt% FA was 85.62 MPa, 6% higher than that of pure EP (80.72 MPa). Impact strength improved at low FA contents (2 wt%), but decreased with increasing FA contents due to decreased matrix deformability and particle cohesion. Thermogravimetric analysis revealed that the introduction of FA enhanced the thermal stability. For EPS6 (234°C), at 5wt% mass loss the thermal stability enhancement was 17% over EP (200°C). The enhancement is due to restricted polymer chain movement. Morphological studies revealed that lower filler content resulted in a more uniform particle distribution, which was closely related to improved interfacial adhesion and stress transfer efficiency. These results demonstrate that the optimized FA addition (6 wt%) not only significantly improves mechanical strength and thermal stability, but also provides a cost-effective and environmentally friendly method for producing high-performance hybrid composites suitable for structural and industrial applications.

Zitieren

APA

Maurya, A., Kumar, P., Kumar, B., Rajput, R. S., & Singh, V. K. (2026). Optimization of fly ash reinforcement in epoxy/polyester blended composites for improved thermo-mechanical performance. Journal of Elastomers & Plastics, 58(5), 976-993. https://doi.org/10.1177/00952443261436655

Vancouver

Maurya A, Kumar P, Kumar B, Rajput RS, Singh VK. Optimization of fly ash reinforcement in epoxy/polyester blended composites for improved thermo-mechanical performance. Journal of Elastomers & Plastics. 2026;58(5):976-993. doi:10.1177/00952443261436655

BibTeX
@article{Maurya2026,
  author = {Maurya, Anand and Kumar, Pradeep and Kumar, Brajesh and Rajput, Ravish Singh and Singh, Vinay Kumar},
  title = {Optimization of fly ash reinforcement in epoxy/polyester blended composites for improved thermo-mechanical performance},
  journal = {Journal of Elastomers & Plastics},
  year = {2026},
  volume = {58},
  number = {5},
  pages = {976--993},
  doi = {10.1177/00952443261436655}
}
Kostenlos starten →