A numerical-experimental framework for the design of .22 LR caliber conversion systems in service rifles with offset charging-handle arrangements
Science Progress · 2026-10 · 109 (4)
DOI: 10.1177/00368504261508939 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Progress, online erschienen am 17.11.2026. Verfasst von Osvaldo Quintana-Hernández und 5 weiteren Autor:innen. Beteiligte Einrichtung: Instituto Politécnico Nacional, SEPI-ESIME, U.P. Adolfo López Mateos, Zacatenco, Cd de México, Mexico. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Secretaría de Ciencia, Humanidades, Tecnología e Innovación de México.
Abstract (Originalsprache)
Objective
To develop and validate a coupled numerical-experimental framework for designing .22 LR caliber-conversion mechanisms for 5.56 mm service rifles with offset, non-coaxial charging-handle arrangements that preclude the use of standard AR-15/M4 commercial conversion kits.
Methods
A commercial AR-15/M4 conversion unit and a proposed offset charging-handle mechanism were modeled under equivalent boundary conditions. Static structural analysis evaluated a stuck-bolt scenario at a peak chamber pressure of 170 MPa. Explicit dynamic simulations reproduced the transient opening phase using a time-dependent pressure function and a spring-damper representation of the recoil system, assessed with and without the recoil spring. A TRL-6 metallic prototype was fire-tested and recorded by high-speed video to recover time-displacement data and average bolt velocity.
Results
In the spring-equipped configuration, the model reproduced maximum bolt displacement within approximately 3% for both the commercial (28.0 vs 28.7 mm) and proposed (31.9 vs 31.0 mm) systems, supporting adequate representation of bolt travel and contact behavior. Average bolt velocity and cycle time remained within the same order of magnitude as the video-derived values. Peak von Mises stresses appeared as transient, localized concentrations during the pressure pulse, while time-averaged stresses stayed within the elastic regime of the AISI 4140 steel. Spring-less cases, retained as undamped numerical references, predicted greater free travel (49.5 mm commercial; 45.5 mm proposed).
Conclusions
The framework provides a reliable methodology for designing and validating custom .22 LR conversion systems in non-standard architectures, predicting maximum bolt displacement and identifying durability-critical regions while potentially reducing development cycles and prototyping costs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Instituto Politécnico Nacional, SEPI-ESIME, U.P. Adolfo López Mateos, Zacatenco, Cd de México, Mexico.
- SEDENA, D.G.E.M., Universidad del Ejército y Fuerza Aérea, Escuela Militar de Ingeniería, Naucalpan, Mexico.
ORCID-Profile: Osvaldo Quintana-Hernández, Usiel S Silva-Rivera
Förderung
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación de México
Zitieren
APA
Quintana-Hernández, O., Martínez-Trinidad, J., Silva-Rivera, U. S., Hernández-Maciel, J., Wong-Angel, W. D., & Hernández-Hernández, V. (2026). A numerical-experimental framework for the design of .22 LR caliber conversion systems in service rifles with offset charging-handle arrangements. Science Progress, 109(4). https://doi.org/10.1177/00368504261508939
Vancouver
Quintana-Hernández O, Martínez-Trinidad J, Silva-Rivera US, Hernández-Maciel J, Wong-Angel WD, Hernández-Hernández V. A numerical-experimental framework for the design of .22 LR caliber conversion systems in service rifles with offset charging-handle arrangements. Science Progress. 2026;109(4). doi:10.1177/00368504261508939
BibTeX
@article{QuintanaHernndez2026,
author = {Quintana-Hernández, Osvaldo and Martínez-Trinidad, José and Silva-Rivera, Usiel S and Hernández-Maciel, Javier and Wong-Angel, Wilbert D and Hernández-Hernández, Víctor},
title = {A numerical-experimental framework for the design of .22 LR caliber conversion systems in service rifles with offset charging-handle arrangements},
journal = {Science Progress},
year = {2026},
volume = {109},
number = {4},
doi = {10.1177/00368504261508939}
}
EUVIMED