The effect of hot oscillatory pressing sintering time on microstructure, grain growth kinetics and properties of W–Ti refractory alloy targets
Powder Metallurgy · 25.07.2026
DOI: 10.1177/00325899261471955 ↗Kurz gefasst
Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 25.07.2026. Verfasst von Ka Gao und 6 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The effects of different sintering times (0.5, 1 and 1.5 h) of hot oscillatory pressing on microstructure, densification, grain growth process and properties of 90W–10Ti refractory alloy targets are investigated for the first time in this work. With prolonged sintering time, both microstructure and relative density are markedly enhanced, accompanied by gradual abnormal grain growth. At a sintering time of 1.5 h, the highest density can reach 97.7%, and the grain size is about 2.14 μm. Due to the optimization and improvement of W-W particle adjacency and Ti-rich phase aggregation, its Vickers hardness and electrochemical corrosion current density can reach ∼526.41 HV 30 and 9.63 × 10 −6 A/cm 2 , with a significant improvement in alloy properties compared to those obtained with shorter sintering times. When the sintering time is short (0.5 and 1 h), its densification rate is faster, and the goal of rapid densification can be achieved in a short time. Moreover, the reduced number of microstructural defects leads to improved performance. Additionally, the grain growth exponent n was 2, indicating that the grain growth mechanism was grain boundary diffusion. Long sintering time caused grain growth, which had an adverse effect on its performance.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Gao, K., Tang, Y., Gao, Z., Xie, F., Chen, W., Sun, P., & Wang, H. (2026). The effect of hot oscillatory pressing sintering time on microstructure, grain growth kinetics and properties of W–Ti refractory alloy targets. Powder Metallurgy. https://doi.org/10.1177/00325899261471955
Vancouver
Gao K, Tang Y, Gao Z, Xie F, Chen W, Sun P, et al. The effect of hot oscillatory pressing sintering time on microstructure, grain growth kinetics and properties of W–Ti refractory alloy targets. Powder Metallurgy. 2026. doi:10.1177/00325899261471955
BibTeX
@article{Gao2026,
author = {Gao, Ka and Tang, Yufan and Gao, Ziheng and Xie, Furong and Chen, Wei and Sun, Pengqi and Wang, Hailong},
title = {The effect of hot oscillatory pressing sintering time on microstructure, grain growth kinetics and properties of W–Ti refractory alloy targets},
journal = {Powder Metallurgy},
year = {2026},
doi = {10.1177/00325899261471955}
}
EUVIMED