Recent advances in low-pressure powder injection moulding: A short review of wax-based, backbone-free systems
Powder Metallurgy · 2026-08 · 69 (4) · 285-291
DOI: 10.1177/00325899261460580 ↗Kurz gefasst
Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 17.06.2026. Verfasst von Seyed Mohammad Majdi. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Low-pressure powder injection moulding (LPIM) has advanced through developments in feedstock formulation, mould-filling simulation, thermal wick-debinding, and sintering of irregular metallic powders. This review focuses specifically on the wax-based, backbone-free branch of LPIM, in which thermal wick-debinding is the distinctive binder-removal route, as this is where the most recent quantitative progress has occurred. It synthesizes these developments and identifies the gaps that define the next phase of LPIM research. Wax-based binder formulations have been developed for stainless steels, iron, titanium, and Inconel 718, with solid loadings up to 62 vol.% and viscosities below 20 Pa·s. Numerical simulation has evolved from qualitative flow-pattern matching to quantitative in-cavity pressure validation, and current models reproduce experimental pressures with errors of 30%–64% across complex geometries. Thermal wick-debinding, the distinctive debinding route for backbone-free LPIM feedstocks, has been placed on a quantitative footing through a coupled experimental and COMSOL-based study. Sintering studies of irregular water-atomized iron powders, matched to optimized debinding and sintering schedules, have achieved densities and tensile properties comparable to those obtained with spherical gas-atomized feedstocks, supporting a lower-cost route to structural LPIM components. The review concludes with five research opportunities: closing the simulation–experiment gap; systematically studying the green-density–sintered-density relationship that distinguishes LPIM from HPIM, including dimensional accuracy and shrinkage anisotropy; extending to reactive and oxidation-sensitive alloys; integrating with material extrusion additive manufacturing, including SLA-printed and sacrificial mould strategies; and developing sustainable wax recovery, biosourced binders, and reduced-energy debinding routes.
Zitieren
APA
Majdi, S. M. (2026). Recent advances in low-pressure powder injection moulding: A short review of wax-based, backbone-free systems. Powder Metallurgy, 69(4), 285-291. https://doi.org/10.1177/00325899261460580
Vancouver
Majdi SM. Recent advances in low-pressure powder injection moulding: A short review of wax-based, backbone-free systems. Powder Metallurgy. 2026;69(4):285-291. doi:10.1177/00325899261460580
BibTeX
@article{Majdi2026,
author = {Majdi, Seyed Mohammad},
title = {Recent advances in low-pressure powder injection moulding: A short review of wax-based, backbone-free systems},
journal = {Powder Metallurgy},
year = {2026},
volume = {69},
number = {4},
pages = {285--291},
doi = {10.1177/00325899261460580}
}
EUVIMED