EUVIMEDEUVIMED entdecken
Crossref

Experimental study on the regulation of microstructure and properties of SLM-formed TC4 titanium alloy by heat treatment

Zhang Xiaoqing, Han Hongli, Tao Chunsheng, Shi Wentian, Li Yuan, Jiang Ruihao, Haider Muhammad Usman

Powder Metallurgy · 2026-08 · 69 (4) · 316-328

DOI: 10.1177/00325899261431993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 13.06.2026. Verfasst von Zhang Xiaoqing und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the strength-ductility trade-off in selective laser melting fabricated TC4 titanium alloy caused by the formation of a nonequilibrium martensitic α′-phase during rapid solidification. Specimens were solution-treated at 950 to 1000 °C, followed by water quenching, and aged at 500 or 550 °C. Microstructure was analysed using deep learning for α-phase quantification. Mechanical and corrosion properties were assessed through tensile tests, Vickers hardness measurements, and electrochemical testing in 3.5 wt% NaCl solution. Results demonstrate that the 990 °C solution treatment followed by 500 °C ageing produced a high fraction of 86.2% equiaxed primary α-phase. This refined structure led to a remarkable 126% improvement in elongation, increasing from 4.9% in the as-fabricated state to 11.1%, while maintaining high tensile strength of 870 MPa and hardness of 312 HV. Corrosion resistance was also significantly enhanced, evidenced by a 68 percent reduction in corrosion current density, along with increases of 0.25 volts in pitting potential and 0.32 volts in breakdown potential of the passive film. In contrast, increasing the solution temperature to 1000 °C reduced the primary α-phase fraction to 80.4% and resulted in inferior mechanical and corrosion performance, confirming 990 °C as the optimal solution temperature. This work demonstrates that solution treatment and ageing heat treatment effectively optimise the microstructure of selective laser melting processed TC4 alloy, achieving simultaneous improvement in both ductility and corrosion resistance without strength compromise. The strategy provides a viable processing route for manufacturing critical components in aerospace and biomedical applications that demand complex geometries, superior damage tolerance, and excellent corrosion resistance.

Zitieren

APA

Xiaoqing, Z., Hongli, H., Chunsheng, T., Wentian, S., Yuan, L., Ruihao, J., & Usman, H. M. (2026). Experimental study on the regulation of microstructure and properties of SLM-formed TC4 titanium alloy by heat treatment. Powder Metallurgy, 69(4), 316-328. https://doi.org/10.1177/00325899261431993

Vancouver

Xiaoqing Z, Hongli H, Chunsheng T, Wentian S, Yuan L, Ruihao J, et al. Experimental study on the regulation of microstructure and properties of SLM-formed TC4 titanium alloy by heat treatment. Powder Metallurgy. 2026;69(4):316-328. doi:10.1177/00325899261431993

BibTeX
@article{Xiaoqing2026,
  author = {Xiaoqing, Zhang and Hongli, Han and Chunsheng, Tao and Wentian, Shi and Yuan, Li and Ruihao, Jiang and Usman, Haider Muhammad},
  title = {Experimental study on the regulation of microstructure and properties of SLM-formed TC4 titanium alloy by heat treatment},
  journal = {Powder Metallurgy},
  year = {2026},
  volume = {69},
  number = {4},
  pages = {316--328},
  doi = {10.1177/00325899261431993}
}
Kostenlos starten →