EUVIMEDEUVIMED entdecken
Crossref

Evolution of microstructure and properties of CuCr50 alloy prepared by liquid phase sintering coupled with complementary copper infiltration

Xiaorui He, Jin-ru Han, Qiang Li, Junqiang Zhou, Wei Liu, Hongjun Zhang, Weiwei Yang, Yafeng Wang, Haihong Wang

Powder Metallurgy · 2025-02 · 68 (1) · 53-61

DOI: 10.1177/00325899241288692 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 23.10.2024. Verfasst von Xiaorui He und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CuCr alloy has become the preferred contact material in the field of environmental protection vacuum switches because of its good mechanical and electrical properties, and the development of preparation technology of highly dense and homogeneous CuCr alloy has become one of its research directions. In this paper, the concepts of liquid phase sintering and complementary copper infiltration are coupled to prepare CuCr50 alloys, which are subjected to secondary treatment using solid solution as well as aging heat treatments, to observe the evolution of the microstructure and properties of CuCr50 alloys. It is found that CuCr50 alloy can be prepared stably by liquid phase sintering coupled with complementary copper infiltration. The average particle size of the Cr-rich phase in CuCr50 alloy is 48.9 μm after liquid phase sintering, solid solution treatment and aging treatment, and the uniformity of the distribution of the Cr-rich phase is improved compared with the billet and sintered state. At this time, the density of the CuCr50 alloy is 7.94 g·cm −3 , the electrical conductivity is 22.77 MS·m −1 , and the hardness reaches 113.2 HB. Compared with the requirements in the national standard GB/T 26867-2011, the density, conductivity, and hardness are increased by 0.51%, 42.3%, and 41.5%, respectively. The peak of the density of states at energies around −5 eV on the total density of states diagram is contributed by the superposition of the 3d orbitals of Cu and the 3d orbitals of Cr, which is a reason for the stable existence of the CuCr50 alloy.

Zitieren

APA

He, X., Han, J., Li, Q., Zhou, J., Liu, W., Zhang, H., Yang, W., Wang, Y., & Wang, H. (2025). Evolution of microstructure and properties of CuCr50 alloy prepared by liquid phase sintering coupled with complementary copper infiltration. Powder Metallurgy, 68(1), 53-61. https://doi.org/10.1177/00325899241288692

Vancouver

He X, Han J, Li Q, Zhou J, Liu W, Zhang H, et al. Evolution of microstructure and properties of CuCr50 alloy prepared by liquid phase sintering coupled with complementary copper infiltration. Powder Metallurgy. 2025;68(1):53-61. doi:10.1177/00325899241288692

BibTeX
@article{He2025,
  author = {He, Xiaorui and Han, Jin-ru and Li, Qiang and Zhou, Junqiang and Liu, Wei and Zhang, Hongjun and Yang, Weiwei and Wang, Yafeng and Wang, Haihong},
  title = {Evolution of microstructure and properties of CuCr50 alloy prepared by liquid phase sintering coupled with complementary copper infiltration},
  journal = {Powder Metallurgy},
  year = {2025},
  volume = {68},
  number = {1},
  pages = {53--61},
  doi = {10.1177/00325899241288692}
}
Kostenlos starten →