Temperature dependent structural integrity of S2-glass and E-glass fiber reinforced epoxy laminates under indentation and flexural loading
Journal of Composite Materials · 2026-09 · 60 (22) · 2059-2070
DOI: 10.1177/00219983261473985 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 28.07.2026. Verfasst von Huseyin Erdem Yalkin. Die Arbeit nennt 54 Literaturangaben.
Abstract (Originalsprache)
Glass fiber reinforced polymer composites are extensively utilized in aerospace, automotive, and marine structures, where they frequently encounter broad thermal fluctuations. Despite their widespread use, the fundamental differences in how distinct glass fiber types interact with polymer matrices under variable temperatures remain underexplored. This study presents a comprehensive, comparative investigation into the temperature-dependent mechanical degradation mechanisms and damage tolerance of S2-glass/epoxy and E-glass/epoxy laminates fabricated via vacuum infusion. Quasi-static indentation (QSI) and three-point bending tests were performed at sub-ambient (−25°C), room (25°C), and elevated (75°C) temperatures, all situated below the measured glass transition temperature (Tg = 110°C). The macroscopic structural response was quantitatively correlated with microscopic failure mechanisms elucidated through scanning electron microscopy (SEM) and validated by statistical analysis (ANOVA). S2-glass composites exhibited superior structural integrity and thermal stability across the entire temperature spectrum. At sub-ambient conditions, restricted polymer chain mobility led to increased stiffness but reduced ductility, promoting brittle matrix cracking. Conversely, at elevated temperatures, increased free volume induced matrix softening and relaxation of compressive residual stresses at the fiber-matrix interface, resulting in a transition to ductile, interface-dominated failure. The findings establish that the intrinsic chemical composition and enhanced interfacial adhesion of S2-glass significantly mitigate thermo-mechanical degradation, providing critical design guidelines for ensuring the structural reliability of composite components in thermally demanding environments.
Zitieren
APA
Yalkin, H. E. (2026). Temperature dependent structural integrity of S2-glass and E-glass fiber reinforced epoxy laminates under indentation and flexural loading. Journal of Composite Materials, 60(22), 2059-2070. https://doi.org/10.1177/00219983261473985
Vancouver
Yalkin HE. Temperature dependent structural integrity of S2-glass and E-glass fiber reinforced epoxy laminates under indentation and flexural loading. Journal of Composite Materials. 2026;60(22):2059-2070. doi:10.1177/00219983261473985
BibTeX
@article{Yalkin2026,
author = {Yalkin, Huseyin Erdem},
title = {Temperature dependent structural integrity of S2-glass and E-glass fiber reinforced epoxy laminates under indentation and flexural loading},
journal = {Journal of Composite Materials},
year = {2026},
volume = {60},
number = {22},
pages = {2059--2070},
doi = {10.1177/00219983261473985}
}
EUVIMED