EUVIMEDEUVIMED entdecken
Crossref

Research on optimization design method of CFRP/metal composite thin-walled square tube structure based on surrogate model

Yong Xiao, XiaoPing Zhang, JiaLin Li, XiangJing Lv

Journal of Composite Materials · 21.05.2026

DOI: 10.1177/00219983261453237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 21.05.2026. Verfasst von Yong Xiao und 3 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, Chongqing Jiaotong University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CFRP/metal composite thin-walled structures show great potential for automotive energy absorbers. However, existing studies rarely address the co-optimization of key design variables—metal wall thickness, CFRP layup angle, and CFRP layup thickness—and conventional multi-objective algorithms are prone to local optimality when balancing specific energy absorption (SEA) and peak crushing force (PCF). To fill this gap, this paper focuses on CFRP/metal composite square tubes, selecting metal wall thickness (A), CFRP layup angle (B), and CFRP layup thickness (C) as design variables. A surrogate model is constructed via numerical simulation and experimental validation, and the improved multi-objective artificial hummingbird algorithm (MOAHA) is introduced to optimize SEA and PCF. Results show the improved algorithm achieves winning rates of 76.7%, 86.7%, and 80% on HV, IGD, and Spacing metrics, outperforming the original algorithm in 76.7–86.7% of test scenarios. The weighted distance method selects the optimal solution from the Pareto set, verified by Abaqus simulation and prototype experiments with relative errors all below 5%. This study illustrates the synergistic mechanism of the three variables on the SEA-PCF trade-off, mitigating their conflict, and provides a reference for engineering design of such energy absorbers and practical application of multi-objective optimization algorithms.

Förderung

  • China Postdoctoral Science Foundation
  • Chongqing Jiaotong University

Zitieren

APA

Xiao, Y., Zhang, X., Li, J., & Lv, X. (2026). Research on optimization design method of CFRP/metal composite thin-walled square tube structure based on surrogate model. Journal of Composite Materials. https://doi.org/10.1177/00219983261453237

Vancouver

Xiao Y, Zhang X, Li J, Lv X. Research on optimization design method of CFRP/metal composite thin-walled square tube structure based on surrogate model. Journal of Composite Materials. 2026. doi:10.1177/00219983261453237

BibTeX
@article{Xiao2026,
  author = {Xiao, Yong and Zhang, XiaoPing and Li, JiaLin and Lv, XiangJing},
  title = {Research on optimization design method of CFRP/metal composite thin-walled square tube structure based on surrogate model},
  journal = {Journal of Composite Materials},
  year = {2026},
  doi = {10.1177/00219983261453237}
}
Kostenlos starten →