Delamination and thrust force analysis in GLARE: Influence of tool geometry and prediction with machine learning models
Journal of Composite Materials · 2025-05 · 59 (10) · 1233-1249
DOI: 10.1177/00219983241305706 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 12.12.2024. Verfasst von Ergün Ekici und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben.
Abstract (Originalsprache)
The multi-layered (fiber/metal) structure of glass fibre aluminium reinforced epoxy (GLARE) makes it difficult to obtain acceptable damage-free holes that meet aerospace standards. This paper investigated the effects of tool geometry and drilling parameters on reducing delamination damage and uncut fibers at the hole exit surface in drilling GLARE. The hole surfaces were examined by scanning electron microscope (SEM) at various magnifications. In addition, deep neural network (DNN) and long-short-term memory (LSTM) machine learning models were used to predict delamination (F da ), uncut fiber (UCF), and thrust forces using experimental data. No positive contribution of the special geometry tool was observed, while the standard geometry tool was found to be ideal for drilling conditions. Analysis of variance (ANOVA) revealed that feed rate contributed 57.83% to delamination damage, while tool geometry contributed 74.31% and 92.33% for uncut fiber and thrust force, respectively. SEM analysis revealed high deformation zones in the aluminum layers and fiber fracture and separation in the glass fibre reinforced polymer (GFRP) layers. DNN and LSTM models were found to provide accurate predictions with R 2 values greater than 95% and 98%, respectively.
Zitieren
APA
Ekici, E., Pazarkaya, İ., & Uzun, G. (2025). Delamination and thrust force analysis in GLARE: Influence of tool geometry and prediction with machine learning models. Journal of Composite Materials, 59(10), 1233-1249. https://doi.org/10.1177/00219983241305706
Vancouver
Ekici E, Pazarkaya İ, Uzun G. Delamination and thrust force analysis in GLARE: Influence of tool geometry and prediction with machine learning models. Journal of Composite Materials. 2025;59(10):1233-1249. doi:10.1177/00219983241305706
BibTeX
@article{Ekici2025,
author = {Ekici, Ergün and Pazarkaya, İbrahim and Uzun, Gültekin},
title = {Delamination and thrust force analysis in GLARE: Influence of tool geometry and prediction with machine learning models},
journal = {Journal of Composite Materials},
year = {2025},
volume = {59},
number = {10},
pages = {1233--1249},
doi = {10.1177/00219983241305706}
}
EUVIMED