EUVIMEDEUVIMED entdecken
Crossref

Optimization of low-velocity impact behavior of FML structures at different environmental temperatures using taguchi method and grey relational analysis

Mustafa Dündar, İlyas Uygur, Ergün Ekici

Journal of Composite Materials · 2025-03 · 59 (7) · 885-906

DOI: 10.1177/00219983241301751 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 19.11.2024. Verfasst von Mustafa Dündar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: Düzce Üniversitesi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber-reinforced Aluminum Laminate (CARALL) is a new generation of Fibre Metal Laminate (FML) material. This study investigates the low-velocity impact behavior of CARALL structures at different environmental temperatures (−40°C, 23°C, and 80°C). Two different groups of CARALL composite structures with varying fiber orientations were produced by hot pressing in a 3/2 arrangement: C1 (Al/0°90°/Al/90°0°/Al) and C2 (Al/0°0°/Al/0°0°/Al). Low-velocity impact tests were conducted at 23 J, 33 J, and 48 J energy levels using a Ø20 mm spherical impactor tip. The area of damage was detected by ultrasonic C-Scan. In addition, analysis of variance (ANOVA) was applied to reveal the influential parameters and their effect levels. After conducting experiments using the Taguchi L 18 test set, it was observed that the C2-coded specimen yielded better results in terms of maximum peak load, maximum displacement, and damage area. While the decrease in temperature increased the damage and maximum peak load, the increase in temperature did not cause a significant change in the maximum peak load. The primary damage mechanisms observed in damage investigations were matrix cracks and delamination between composite layers. Although delamination is present between the Al/CFRP layer, it is not significant. According to ANOVA results, impact energy was the most effective parameter for maximum impact force, maximum displacement, and damage area, with contribution rates of 81%, 74%, and 76%, respectively. The optimal experimental conditions (23°C temperature and 23 J impact energy with the C1-coded sample) were determined using grey relational analysis based on principal component analysis.

Förderung

  • Düzce Üniversitesi

Zitieren

APA

Dündar, M., Uygur, İ., & Ekici, E. (2025). Optimization of low-velocity impact behavior of FML structures at different environmental temperatures using taguchi method and grey relational analysis. Journal of Composite Materials, 59(7), 885-906. https://doi.org/10.1177/00219983241301751

Vancouver

Dündar M, Uygur İ, Ekici E. Optimization of low-velocity impact behavior of FML structures at different environmental temperatures using taguchi method and grey relational analysis. Journal of Composite Materials. 2025;59(7):885-906. doi:10.1177/00219983241301751

BibTeX
@article{Dndar2025,
  author = {Dündar, Mustafa and Uygur, İlyas and Ekici, Ergün},
  title = {Optimization of low-velocity impact behavior of FML structures at different environmental temperatures using taguchi method and grey relational analysis},
  journal = {Journal of Composite Materials},
  year = {2025},
  volume = {59},
  number = {7},
  pages = {885--906},
  doi = {10.1177/00219983241301751}
}
Kostenlos starten →