Insights into morphology and mechanical properties of architected interpenetrating aluminum-alumina composites
Journal of Composite Materials · 2024-10 · 58 (24) · 2623-2637
DOI: 10.1177/00219983241271054 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 05.08.2024. Verfasst von Carlos Matos und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Programa Operacional Regional do Centro, Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
Additive manufacturing (AM) technologies are unleashing the restrictions imposed by conventional manufacturing, allowing the production of innovative designs tailored to improve properties or performance. AM techniques in ceramic production allow the application of novel designs to ceramic parts, opening new opportunities for combining technologies aiming to obtain architected interpenetrating phase composites (IPCs). In this study, alumina structures with different architectures and Computer Aided Design (CAD) structure porosity oriented unidirectionally or bidirectionally, were fabricated by vat photopolymerization technique, namely Digital Light Processing. Afterwards, these structures were infiltrated with an aluminum alloy through investment casting, thus obtaining aluminum-alumina IPCs. Under compression, the IPCs presented a ductile behavior, conversely to the fragile ceramic counterparts. The IPCs compressive strength and absorbed energy were expressively higher than their ceramic counterparts. Comparing the bidirectional IPCs with the unidirectional ones, a significant increase in compressive strength and absorbed energy was observed, from 36.2% to 42.3% and from 164.8% to 358.1%, respectively, due to the greater amount and interconnection of the metal inside the ceramic structure. This study demonstrates the feasibility of this manufacturing route, combining two distinctive technologies, for the fabrication of metal-ceramic architected IPCs, allowing to tailor their mechanical properties and energy absorption capacity for a given application.
Förderung
- Programa Operacional Regional do Centro
- Fundação para a Ciência e a Tecnologia
Zitieren
APA
Matos, C., Santos, S., Duarte, I., Olhero, S. M., & Miranda, G. (2024). Insights into morphology and mechanical properties of architected interpenetrating aluminum-alumina composites. Journal of Composite Materials, 58(24), 2623-2637. https://doi.org/10.1177/00219983241271054
Vancouver
Matos C, Santos S, Duarte I, Olhero SM, Miranda G. Insights into morphology and mechanical properties of architected interpenetrating aluminum-alumina composites. Journal of Composite Materials. 2024;58(24):2623-2637. doi:10.1177/00219983241271054
BibTeX
@article{Matos2024,
author = {Matos, Carlos and Santos, Simão and Duarte, Isabel and Olhero, Susana M and Miranda, Georgina},
title = {Insights into morphology and mechanical properties of architected interpenetrating aluminum-alumina composites},
journal = {Journal of Composite Materials},
year = {2024},
volume = {58},
number = {24},
pages = {2623--2637},
doi = {10.1177/00219983241271054}
}
EUVIMED