EUVIMEDEUVIMED entdecken
Crossref

Aero-structural optimization and actuation analysis of a morphing wing section with embedded selectively stiff bistable elements

José R Rivas-Padilla, D Matthew Boston, Karthik Boddapati, Andres F Arrieta

Journal of Composite Materials · 2023-02 · 57 (4) · 737-757

DOI: 10.1177/00219983231155163 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 07.02.2023. Verfasst von José R Rivas-Padilla und 3 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: Air Force Office of Scientific Research, Army Research Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Morphing wings provide a potential avenue to improve aerodynamic performance of aircraft operating at multiple design conditions. Nevertheless, morphing wing design is constrained by the mutually exclusive goals of high load-carrying capacity, low weight, and sufficient aerodynamic control authority via conformal shape adaptation. This trade-off can be addressed by exploiting the stiffness selectivity and shape “lock-in” properties enabled by using bistable beam-like elements within compliant structures. In this paper, we present an aero-structural optimization method to realize morphing structures with selective stiffness and shape “lock-in” capability from embedded bistable elements. We leverage an embeddable beam element with an invertible curved arch that provides stiffness selectivity and camber variation to the proposed rib geometry. Optimization objectives and constraints are designed to maximize the structure’s stiffness change and camber morphing “lock-in” effect when operating at two distinct flight conditions. Using the optimization results, we manufacture a wing section demonstrator with selective stiffness and “lock-in” morphing featuring two optimized ribs, a load-carrying skin made of a carbon reinforced laminate, Macro-Fiber Composite (MFC) actuators, and a servo-controlled mechanism for switching the bistable elements’ states. The power and energy requirements of actuating and holding a target deflection are experimentally measured and compared. The results show that the bistable elements can assist in holding a target deflection at a reduced energy cost. Finally, we test the experimental demonstrator in a low-speed wind tunnel demonstrating the load carrying capability and lift variation achieved from switching states.

Förderung

  • Air Force Office of Scientific Research
  • Army Research Laboratory

Zitieren

APA

Rivas-Padilla, J. R., Boston, D. M., Boddapati, K., & Arrieta, A. F. (2023). Aero-structural optimization and actuation analysis of a morphing wing section with embedded selectively stiff bistable elements. Journal of Composite Materials, 57(4), 737-757. https://doi.org/10.1177/00219983231155163

Vancouver

Rivas-Padilla JR, Boston DM, Boddapati K, Arrieta AF. Aero-structural optimization and actuation analysis of a morphing wing section with embedded selectively stiff bistable elements. Journal of Composite Materials. 2023;57(4):737-757. doi:10.1177/00219983231155163

BibTeX
@article{RivasPadilla2023,
  author = {Rivas-Padilla, José R and Boston, D Matthew and Boddapati, Karthik and Arrieta, Andres F},
  title = {Aero-structural optimization and actuation analysis of a morphing wing section with embedded selectively stiff bistable elements},
  journal = {Journal of Composite Materials},
  year = {2023},
  volume = {57},
  number = {4},
  pages = {737--757},
  doi = {10.1177/00219983231155163}
}
Kostenlos starten →