EUVIMEDEUVIMED entdecken
Crossref

Anisotropic performance of FDM-printed ABS/MWCNT nanocomposites: Investigating the influence of production direction on mechanical properties and electrical conductivity

Mustafa Ercan Gündüz, Özgün Ceren Akbay, Erkan Bahçe

Journal of Cellular Plastics · 09.11.2026

DOI: 10.1177/0021955x261508693 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Cellular Plastics, online erschienen am 09.11.2026. Verfasst von Mustafa Ercan Gündüz und 2 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: Scientific Research Projects (BAP) Coordination Unit of İnönü University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the development of additive manufacturing technologies, lattice structures capable of simultaneously providing lightweight characteristics, high specific strength, and functional properties have gained increasing importance in engineering applications. In particular, the use of electrically conductive composite filaments offers new opportunities in areas such as health monitoring, piezoresistive sensing, and smart engineering systems. In such applications, structures are required to possess not only adequate electrical performance but also reliable mechanical strength. However, the anisotropic behavior resulting from the layered structure of parts produced by the Fused Deposition Modeling (FDM) process causes both mechanical and electrical properties to vary depending on the build orientation. In this study, the mechanical and electrical performances of TPMS (Triply Periodic Minimal Surface)-based Gyroid, Diamond, and Schwarz lattice structures fabricated by the FDM process using ABS matrix filaments reinforced with MWCNTs (Multi-Walled Carbon Nanotubes) were investigated. Compression tests, surface hardness measurements, and electrical resistance measurements were conducted on specimens manufactured in different build orientations (XY and Z). The analysis and characterization results demonstrated that TPMS topology, MWCNT content, and build orientation have significant effects on the performance of the structures. The highest electrical conductivity value, 0.0257 S/m, was obtained for the Gyroid specimens containing 1% MWCNT and manufactured in the Z orientation. As the MWCNT content increased to 3% and 5%, a significant decrease in conductivity values was observed, which was associated with nanotube agglomeration and the disruption of conductive network continuity at higher filler contents. Furthermore, it was determined that build orientation induced considerable anisotropy in electrical behavior, resulting in conductivity differences approaching two hundredfold between the Z and XY orientations in some specimens. When the mechanical and electrical results were evaluated together, the Gyroid geometry exhibited a more balanced and stable performance, and it was revealed that TPMS topology and build orientation are critical parameters in the design of multifunctional composite structures.

Förderung

  • Scientific Research Projects (BAP) Coordination Unit of İnönü University

Zitieren

APA

Gündüz, M. E., Akbay, Ö. C., & Bahçe, E. (2026). Anisotropic performance of FDM-printed ABS/MWCNT nanocomposites: Investigating the influence of production direction on mechanical properties and electrical conductivity. Journal of Cellular Plastics. https://doi.org/10.1177/0021955x261508693

Vancouver

Gündüz ME, Akbay ÖC, Bahçe E. Anisotropic performance of FDM-printed ABS/MWCNT nanocomposites: Investigating the influence of production direction on mechanical properties and electrical conductivity. Journal of Cellular Plastics. 2026. doi:10.1177/0021955x261508693

BibTeX
@article{Gndz2026,
  author = {Gündüz, Mustafa Ercan and Akbay, Özgün Ceren and Bahçe, Erkan},
  title = {Anisotropic performance of FDM-printed ABS/MWCNT nanocomposites: Investigating the influence of production direction on mechanical properties and electrical conductivity},
  journal = {Journal of Cellular Plastics},
  year = {2026},
  doi = {10.1177/0021955x261508693}
}
Kostenlos starten →