Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles
Applied Spectroscopy · 2025-09 · 79 (9) · 1346-1355
DOI: 10.1177/00037028251322142 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Spectroscopy, online erschienen am 13.03.2025. Verfasst von Md Wahiduzzaman und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, Texas, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: Division of Chemical, Bioengineering, Environmental, and Transport Systems, Basic Energy Sciences.
Abstract (Originalsprache)
Confocal Raman microscopy was applied to detect structural change within individual particles of low-density polyethylene (LDPE) following chemical and electrochemical processing steps that aimed to facilitate material decomposition. A high numerical aperture (NA) oil-immersion objective enabled depth-profiling through the near surface region (20 μm–40 μm) of irregularly shaped particles with an axial spatial resolution < 2 μm estimated from measurements of instrument detection efficiency profiles. Changes in vibrational bands sensitive to polyethylene crystallinity were evident following treatments and linked to the release of low molecular weight compounds present as additives and products of processing. Effects of processing were probed by monitoring the rise of Raman scattering intensity in vibrational modes associated with polyethylene chains in a zig-zag (trans) conformation near 1128 cm –1 , 1294 cm –1 , and 1418 cm –1 , signaling chain clustering and development of organized, crystalline-like assemblies. Pristine LDPE particles displayed a uniform structure across the near surface region, while particles treated initially with chemical extractant and then further processed displayed increasingly enhanced crystallinity up to the maximum depth probed (40 μm). As a step toward measurements on ensembles of particles, least squares modeling was adapted to derive pure component spectra reflecting crystallinity change within spectral datasets. The work demonstrates high spatial resolution Raman depth-profiling for the characterization of processed polymers using a high NA immersion objective to overcome the limitations of air-objectives often used for confocal Raman microscopy.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, Texas, USA.
- Institute for Sustainability and Circular Economy, Department of Chemical Engineering, Whitacre College of Engineering, Texas Tech University, Lubbock, Texas, USA.
ORCID-Profile: Md Wahiduzzaman, Jeremy Lawrence, Gerardine G Botte, Carol Korzeniewski
Förderung
- Division of Chemical, Bioengineering, Environmental, and Transport Systems
- Basic Energy Sciences
Zitieren
APA
Wahiduzzaman, M., Lawrence, J., Moreno-Gongora, A., Xu, J., Casadonte, D. J., Botte, G. G., & Korzeniewski, C. (2025). Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles. Applied Spectroscopy, 79(9), 1346-1355. https://doi.org/10.1177/00037028251322142
Vancouver
Wahiduzzaman M, Lawrence J, Moreno-Gongora A, Xu J, Casadonte DJ, Botte GG, et al. Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles. Applied Spectroscopy. 2025;79(9):1346-1355. doi:10.1177/00037028251322142
BibTeX
@article{Wahiduzzaman2025,
author = {Wahiduzzaman, Md and Lawrence, Jeremy and Moreno-Gongora, Ashley and Xu, Jiahe and Casadonte, Dominick J and Botte, Gerardine G and Korzeniewski, Carol},
title = {Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles},
journal = {Applied Spectroscopy},
year = {2025},
volume = {79},
number = {9},
pages = {1346--1355},
doi = {10.1177/00037028251322142}
}
EUVIMED