EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D-Printed Hydroxyapatite/Polycaprolactone Porous Scaffolds as Tarsus Substitutes for Eyelid Defects: A Preliminary Study in Rabbits

Jincheng Liu, Simeng Lv, Mengling Zhou, Mange Zhang, Qingyi Wang, Xin Jiang, Fanrong Ai, Qin Huang

Translational Vision Science & Technology · 03.11.2026 · 15 (11) · 4

DOI: 10.1167/tvst.15.11.4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Translational Vision Science & Technology, erschienen am 03.11.2026. Verfasst von Jincheng Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Optometry, Jiangxi Medical College, Nanchang University, Nanchang City, Jiangxi Province, People's Republic of China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Polyesters, Durapatite. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Reconstruction of eyelid tarsal defects remains challenging due to donor-site morbidity, insufficient autologous tissue sources, and biomechanical mismatch between grafts and native tarsal plate. This study aimed to fabricate polyethylene glycol 400-plasticized 3D-printed hydroxyapatite/polycaprolactone (HA/PCL) porous scaffolds, and to compare the repair efficacy of scaffolds with 70% and 84% HA mass fractions in a rabbit eyelid tarsal defect model.

Methods

Scaffolds were fabricated by pneumatic extrusion 3D printing and characterized for porosity, mechanics, hydrophilicity, and cytocompatibility with human umbilical vein endothelial cells (HUVECs). A rabbit tarsal defect model was used to evaluate ocular safety, inflammation, angiogenesis, and tissue integration at 4 and 8 weeks via corneal staining, hematoxylin and eosin (H&E), qPCR, and immunohistochemistry (IHC).

Results

Both scaffolds achieved high porosity of 91.66% and exhibited favorable hydrophilicity and cytocompatibility. The elastic modulus of the 84% HA scaffold was 2.66 MPa, which was closer to that of a natural rabbit tarsal plate. No obvious corneal injury or immune rejection was observed in vivo. Compared with the 70% HA group, the 84% HA scaffold induced milder inflammation, more regular collagen arrangement, tighter tissue integration, and a more stable inflammatory-angiogenic microenvironment.

Conclusions

The 3D‑printed HA/PCL scaffolds are promising for tarsal repair. The 84% HA scaffold offers superior mechanical compatibility, inflammatory regulation, angiogenesis, and tissue regeneration, providing an experimental basis for eyelid reconstruction biomaterials. Translational Relevance: This study translates basic biomaterial's research into clinical ophthalmic care by showing optimized 3D‑printed HA/PCL scaffolds match tarsal mechanics and enhance tissue repair, providing a promising alternative to autologous grafts for clinical eyelid defect reconstruction.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue ScaffoldsPolyestersDurapatiteEyelidsAnimalsRabbitsPorosityHumansTissue EngineeringBiocompatible MaterialsHuman Umbilical Vein Endothelial CellsDisease Models, Animal

Substanzen

PolyesterspolycaprolactoneDurapatiteBiocompatible Materials

Autor:innen und Institutionen

  • School of Optometry, Jiangxi Medical College, Nanchang University, Nanchang City, Jiangxi Province, People's Republic of China.
  • Jiangxi Research Institute of Ophthalmology and Visual Science, Nanchang University, Nanchang City, Jiangxi Province, People's Republic of China.
  • Jiangxi Provincial Key Laboratory for Ophthalmology, Nanchang University, Nanchang, Jiangxi Province, People's Republic of China.
  • National Clinical Research Center for Ocular Diseases, Jiangxi Province Division, Nanchang University, Nanchang, Jiangxi Province, People's Republic of China.
  • The Affiliated Eye Hospital, Jiangxi Medical College, Nanchang University, Nanchang, Jiangxi Province, People's Republic of China.
  • Jiangxi Clinical Research Center for Ophthalmic Disease, Nanchang University, Nanchang, Jiangxi Province, People's Republic of China.

Zitieren

APA

Liu, J., Lv, S., Zhou, M., Zhang, M., Wang, Q., Jiang, X., Ai, F., & Huang, Q. (2026). 3D-Printed Hydroxyapatite/Polycaprolactone Porous Scaffolds as Tarsus Substitutes for Eyelid Defects: A Preliminary Study in Rabbits. Translational Vision Science & Technology, 15(11), 4. https://doi.org/10.1167/tvst.15.11.4

Vancouver

Liu J, Lv S, Zhou M, Zhang M, Wang Q, Jiang X, et al. 3D-Printed Hydroxyapatite/Polycaprolactone Porous Scaffolds as Tarsus Substitutes for Eyelid Defects: A Preliminary Study in Rabbits. Translational Vision Science & Technology. 2026;15(11):4. doi:10.1167/tvst.15.11.4

BibTeX
@article{Liu2026,
  author = {Liu, Jincheng and Lv, Simeng and Zhou, Mengling and Zhang, Mange and Wang, Qingyi and Jiang, Xin and Ai, Fanrong and Huang, Qin},
  title = {3D-Printed Hydroxyapatite/Polycaprolactone Porous Scaffolds as Tarsus Substitutes for Eyelid Defects: A Preliminary Study in Rabbits},
  journal = {Translational Vision Science & Technology},
  year = {2026},
  volume = {15},
  number = {11},
  pages = {4},
  doi = {10.1167/tvst.15.11.4}
}
Kostenlos starten →