EUVIMEDEUVIMED entdecken
Crossref

Specification of the optimal gas metal arc welding (GMAW) parameters to enhance the mild steel strength (MS1018)

G. R. Sanjay Krishna, K. Sai Sarath, Boggarapu Nageswara Rao, Vinay Atgur, N. R. Banapurmath, Chandramouli Vadlamudi, Sanjay Krishnappa, M. A. Umarfarooq, A. M. Sajjan

Materials Express · 01.12.2023 · 13 (12) · 2137-2144

DOI: 10.1166/mex.2023.2562 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Express, erschienen am 01.12.2023. Verfasst von G. R. Sanjay Krishna und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Arc fusion processes, such as high-efficiency gas metal arc welding (GMAW), have become increasingly prevalent in various industries. To optimize the GMAW parameters and enhance the strength of MS 1018, Monika and Chauhan conducted experiments using the low carbon steel filler wire (ER 70 S6). They used a Taguchi L 9 OA (orthogonal array) to generate test data focusing on 3 GMAW parameters such as gas flow rate, arc voltage, and welding current. The performance characteristics considered were tensile strength (TS), weld zone hardness (WZH), and heat-affected zone hardness (HAZH). The effect of GMAW parameters investigated using the S/N (signal-to-noise ratio) transformation of individual test data, which is valid to account for variations observed in repeated tests. By conducting a thorough analysis of variance (ANOVA) on this transformed data, they were able to identify the optimal GMAW parameters for achieving high TS, WZH, and HAZH. Given that HAZH exhibited higher values than WZH, it was evident that TS had the most significant impact on the GMAW process. Consequently, the researchers established empirical relationships for TS, WZH, and HAZH in terms of the GMAW parameters. Their test data aligned reasonably well with the expected range of performance indicators, supporting the validity of their findings. Overall, Monika and Chauhan’s modified Taguchi approach, based on the L 9 OA, allowed them to efficiently conduct a limited number of tests while obtaining comprehensive information on the optimal GMAW parameters for enhancing the strength of MS 1018.

Zitieren

APA

Krishna, G. R. S., Sarath, K. S., Rao, B. N., Atgur, V., Banapurmath, N. R., Vadlamudi, C., Krishnappa, S., Umarfarooq, M. A., & Sajjan, A. M. (2023). Specification of the optimal gas metal arc welding (GMAW) parameters to enhance the mild steel strength (MS1018). Materials Express, 13(12), 2137-2144. https://doi.org/10.1166/mex.2023.2562

Vancouver

Krishna GRS, Sarath KS, Rao BN, Atgur V, Banapurmath NR, Vadlamudi C, et al. Specification of the optimal gas metal arc welding (GMAW) parameters to enhance the mild steel strength (MS1018). Materials Express. 2023;13(12):2137-2144. doi:10.1166/mex.2023.2562

BibTeX
@article{Krishna2023,
  author = {Krishna, G. R. Sanjay and Sarath, K. Sai and Rao, Boggarapu Nageswara and Atgur, Vinay and Banapurmath, N. R. and Vadlamudi, Chandramouli and Krishnappa, Sanjay and Umarfarooq, M. A. and Sajjan, A. M.},
  title = {Specification of the optimal gas metal arc welding (GMAW) parameters to enhance the mild steel strength (MS1018)},
  journal = {Materials Express},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {2137--2144},
  doi = {10.1166/mex.2023.2562}
}
Kostenlos starten →