Design and Performance Optimization of MASnI 3 -Based Efficient Optoelectronic Device for Energy Harvesting P.V. Applications
Journal of Nanoelectronics and Optoelectronics · 01.07.2025 · 20 (7) · 715-724
DOI: 10.1166/jno.2025.3785 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Nanoelectronics and Optoelectronics, erschienen am 01.07.2025. Verfasst von Hammadur Rub Ansari und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben.
Abstract (Originalsprache)
Two-dimensional (2D) charge selective contacts provide a reliable route for high-performance, lead-free perovskite optoelectronics. This study conducts a numerical analysis of a planar n–i–p solar cell utilizing Methyl Ammonium Tin Iodide (MASnI 3 ) as the absorber, Tungsten Disulfide (WS 2 ) as the electron transport layer, and cuprous oxide (Cu 2 O) as the hole transport layer. Leveraging the advantageous band alignment and low-defect van der Waals interface of WS 2 alongside the chemically stable, earth-abundant Cu 2 O hole transport layer, we perform an extensive parametric analysis of device physics pertinent to integrated optoelectronic applications. Thickness variations of the MASnI 3 layer demonstrate the anticipated compromise between improved long-wavelength absorption and thickness related transport recombination losses, resulting in an optimal sub-micrometre range. Fluctuations in absorber defect density exhibit significant recombination-limited deterioration, especially exceeding 10 15 cm −3 evidenced by a consistent reduction in V oc , fill factor, and external quantum efficiency near the band edge. Parasitic circuit elements further constrain performance: enhancing shunt resistance primarily elevates the fill factor, while series resistance diminishes the power-point voltage with negligible effect on J sc . Thermal analysis (280–380 K) reveals that efficiency loss is primarily attributed to declines in V oc and fill factor, whereas J sc remains largely unchanged. Under optimal conditions, the device achieves a simulated power conversion efficiency (PCE) of 32.10%, a fill factor (FF) of 87.03%, an open-circuit voltage (V oc ) of 1.0758 V, and a short-circuit current density (J sc ) of 34.28 mA cm −2 (AM1.5G, 300 K). These findings delineate design parameters for FTO/WS 2 /MASnI 3 /Cu 2 O/Au photovoltaics and highlight their potential as stable, lead-free platforms for high-efficiency solar energy collectors and co-integrated optoelectronic devices, including self-powered photodetectors and sensor nodes.
Zitieren
APA
Ansari, H. R., Nizamuddin, M., Kodati, S., Prakash, K. B., Mehra, V., Kavita, K., Jyothi, P., Ravi, A., & Mishra, P. (2025). Design and Performance Optimization of MASnI 3 -Based Efficient Optoelectronic Device for Energy Harvesting P.V. Applications. Journal of Nanoelectronics and Optoelectronics, 20(7), 715-724. https://doi.org/10.1166/jno.2025.3785
Vancouver
Ansari HR, Nizamuddin M, Kodati S, Prakash KB, Mehra V, Kavita K, et al. Design and Performance Optimization of MASnI 3 -Based Efficient Optoelectronic Device for Energy Harvesting P.V. Applications. Journal of Nanoelectronics and Optoelectronics. 2025;20(7):715-724. doi:10.1166/jno.2025.3785
BibTeX
@article{Ansari2025,
author = {Ansari, Hammadur Rub and Nizamuddin, M. and Kodati, Sarangam and Prakash, Kolla Bhanu and Mehra, Vishal and Kavita, K. and Jyothi, P. and Ravi, A. and Mishra, Prabhash},
title = {Design and Performance Optimization of MASnI 3 -Based Efficient Optoelectronic Device for Energy Harvesting P.V. Applications},
journal = {Journal of Nanoelectronics and Optoelectronics},
year = {2025},
volume = {20},
number = {7},
pages = {715--724},
doi = {10.1166/jno.2025.3785}
}
EUVIMED