Coating Silica Layer on Fe 3 O 4 Magnetic Nanoparticles and Application in Extracting High Quality Nucleic Acids from Blood Sample
Journal of Biomedical Nanotechnology · 01.03.2022 · 18 (3) · 828-836
DOI: 10.1166/jbn.2022.3295 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Nanotechnology, erschienen am 01.03.2022. Verfasst von Zeeshan Ali und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Food and Drug, Shenzhen Polytechnic, Liuxian Avenue, No. 7098, Nanshan District, Shenzhen 518055, Guangdong Province, China. Hauptthemen laut MEDLINE: Magnetite Nanoparticles, Nucleic Acids. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
The given research revealed that the size of Fe 3 O 4 magnetic nanoparticles (MNPs) could be controlled by varying the pre-mixing conditions in the solvothermal method. Scanning electron microscopy (SEM) showed that the size of the MNPs gradually increased with increasing the initial temperature at which reaction components were mixed while the reaction component’s mixing time was kept constant. The smallest sized MNPs were achieved among the five treatments (25, 50, 75, 100, and 125 °C) when reaction components were mixed at 25 °C, while the larger sized MNPs were synthesized among the five treatments when reaction components were mixed at 125 °C. Then, Stöber method was followed for coating silica layer onto the MNPs. However, ammonium hydroxide was replaced with potassium hydroxide as a catalyst, which significantly increased the speed of silica coating onto MNPs. The Fourier transform infrared (FTIR) spectrometer revealed that the MNPs were successfully covered with silica in five minutes. FTIR spectra exhibited a peak about 1088.8 cm −1 , which belonged to the asymmetry stretching vibration of Si–O–Si. Transmission electronic microscopy (TEM) analysis was conducted to confirm the presence of silica layer onto MNPs. Thus, potassium hydroxide was successfully employed as a catalyst for quick silica layer coating onto MNPs. Furthermore, these silica coated MNPs were used to extract high quality nucleic acids from blood sample.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- School of Food and Drug, Shenzhen Polytechnic, Liuxian Avenue, No. 7098, Nanshan District, Shenzhen 518055, Guangdong Province, China.
- School of Materials and Chemical Engineering, Hunan Institute of Engineering, Xiangtan 411104, China.
- Hunan Key Laboratory of Biomedical Nanomaterials and Devices, Hunan University of Technology, Zhuzhou 412007, China.
- Department of Molecular Biology, Jiangsu Cancer Hospital, Nanjing 210009, P. R. China.
Zitieren
APA
Ali, Z., Zou, J., Liu, X., Bai, Y., Hussain, M., Zhang, L., Chen, Z., Chen, H., Li, S., Deng, Y., Zhang, Y., & Tang, Y. (2022). Coating Silica Layer on Fe 3 O 4 Magnetic Nanoparticles and Application in Extracting High Quality Nucleic Acids from Blood Sample. Journal of Biomedical Nanotechnology, 18(3), 828-836. https://doi.org/10.1166/jbn.2022.3295
Vancouver
Ali Z, Zou J, Liu X, Bai Y, Hussain M, Zhang L, et al. Coating Silica Layer on Fe 3 O 4 Magnetic Nanoparticles and Application in Extracting High Quality Nucleic Acids from Blood Sample. Journal of Biomedical Nanotechnology. 2022;18(3):828-836. doi:10.1166/jbn.2022.3295
BibTeX
@article{Ali2022,
author = {Ali, Zeeshan and Zou, Jun and Liu, Xiaolong and Bai, Yongkai and Hussain, Mubashir and Zhang, Lijun and Chen, Zhu and Chen, Hui and Li, Song and Deng, Yan and Zhang, Yuanying and Tang, Yongjun},
title = {Coating Silica Layer on Fe 3 O 4 Magnetic Nanoparticles and Application in Extracting High Quality Nucleic Acids from Blood Sample},
journal = {Journal of Biomedical Nanotechnology},
year = {2022},
volume = {18},
number = {3},
pages = {828--836},
doi = {10.1166/jbn.2022.3295}
}
EUVIMED