EUVIMEDEUVIMED entdecken
Crossref

Assessing the Rheological and Filtration Loss Control Potential of Selected Plant-Based Additives in Oil-Based Mud

Idara Bassey, Anietie Okon, Anselm Igbafe, Aniel Essien

Petroleum Science and Engineering · 23.09.2024 · 8 (2) · 100-124

DOI: 10.11648/j.pse.20240802.13 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Petroleum Science and Engineering, online erschienen am 23.09.2024. Verfasst von Idara Bassey und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In drilling operations, chemical additives pose environmental concerns during mud disposal. This study evaluated three plant-based additives, namely rice husk (RH), Detarium microcarpum (DM), and Brachystegia eurycoma (BE), in oil-based mud at low-pressure, low-temperature conditions. The mud’s rheological profile followed Herschel Bulkley’s model. With 8 g additive content, RH increased the mud's apparent viscosity (AV), plastic viscosity (PV), and yield point (YP) by 62.5%, 51.25%, and 34.38%, respectively. DM showed higher increases of 200.0%, 195.0%, and 162.5%, while BE exhibited the most significant improvements of 287.5%, 272.5%, and 250.0%. The filtration tests indicated that RH reduced spurt loss and fluid loss volumes by 83.33% and 62.35%, while DM decreased by 82.41% and 47.94%, as BE had the highest reduction of 94.44% and 51.18%. Again, the filter cake thickness of RH, DM, and BE muds increased by 210.29%, 273.53%, and 79.41%, respectively, with permeabilities of 8.90×10 -3 mD, 11.87×10 -3 mD, and 7.35×10 -3 mD. Furthermore, the mud susceptibility to NaCl showed that AV decreased for RH, DM, and BE, while YP decreased significantly. The filter cake thickness and permeability increased by 62.38 and 359.55% for RH, as the DM decreased by 93.80% and 84.37% and the BE by 96.68% and 96.62%, which indicates that RH is more susceptible to NaCl than DM and BE in the mud. Also, these plant-based additives in mud exhibited fragile gel strength and commendable cake characteristics: firm, smooth, and soft/slippery, which make them potentially suitable for oil well drilling.

Zitieren

APA

Bassey, I., Okon, A., Igbafe, A., & Essien, A. (2024). Assessing the Rheological and Filtration Loss Control Potential of Selected Plant-Based Additives in Oil-Based Mud. Petroleum Science and Engineering, 8(2), 100-124. https://doi.org/10.11648/j.pse.20240802.13

Vancouver

Bassey I, Okon A, Igbafe A, Essien A. Assessing the Rheological and Filtration Loss Control Potential of Selected Plant-Based Additives in Oil-Based Mud. Petroleum Science and Engineering. 2024;8(2):100-124. doi:10.11648/j.pse.20240802.13

BibTeX
@article{Bassey2024,
  author = {Bassey, Idara and Okon, Anietie and Igbafe, Anselm and Essien, Aniel},
  title = {Assessing the Rheological and Filtration Loss Control Potential of Selected Plant-Based Additives in Oil-Based Mud},
  journal = {Petroleum Science and Engineering},
  year = {2024},
  volume = {8},
  number = {2},
  pages = {100--124},
  doi = {10.11648/j.pse.20240802.13}
}
Kostenlos starten →