EUVIMEDEUVIMED entdecken
Crossref

Comparative Performance Analysis of RC-Coupled, Transformer-Coupled, and Direct-Coupled Common-Emitter Transistor Amplifiers Using Multisim 11.0

Yusuf Abdullahi, Ismail Saidu, Muhammad Abdullahi, Kabir Dabai, Buhari Sahabi, Aisha Mode

Journal of Electrical and Electronic Engineering · 09.09.2026 · 14 (4) · 196-210

DOI: 10.11648/j.jeee.20261404.12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical and Electronic Engineering, online erschienen am 09.09.2026. Verfasst von Yusuf Abdullahi und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The coupling technique employed in multistage transistor amplifiers plays a fundamental role in determining voltage gain, frequency response, bandwidth, and overall amplifier performance. Although resistance-capacitance (RC), transformer, and direct coupling are widely used in analog electronic systems, their comparative performance under identical operating conditions has not been comprehensively investigated. This study aimed to compare the performance of two-stage RC-coupled, transformer-coupled, and direct-coupled common-emitter transistor amplifiers using Multisim 11.0. Three amplifier configurations were designed using identical circuit parameters, including two 2N2222A NPN transistors, a 12 V DC supply, identical voltage-divider bias networks, collector and emitter resistors, and the same input signal conditions. The only difference among the circuits was the interstage coupling technique. Simulations were carried out over a frequency range of 10 Hz to 100 MHz, and the amplifiers were evaluated in terms of voltage gain, frequency response, bandwidth, waveform characteristics, phase relationship, and signal amplification behaviors. The simulation results showed that the RC-coupled amplifier exhibited the highest and most stable mid-band voltage gain of approximately 68 dB together with the widest useful bandwidth, making it the most suitable for general-purpose voltage amplification. The transformer-coupled amplifier demonstrated moderate performance with a peak gain around 100 kHz, indicating its suitability for impedance matching and efficient power transfer. The direct-coupled amplifier produced the lowest voltage gain under the selected operating conditions but retained the capability to amplify DC and very low-frequency signals because it does not employ coupling capacitors or transformers. The study concludes that the choice of coupling technique significantly influences transistor amplifier performance. RC coupling is the preferred technique for high-gain, wide-band voltage amplification, transformer coupling is advantageous for impedance matching and power amplification, whereas direct coupling is most suitable for DC and low-frequency instrumentation applications. These findings provide practical guidance for selecting appropriate coupling techniques in the design of multistage transistor amplifiers.

Zitieren

APA

Abdullahi, Y., Saidu, I., Abdullahi, M., Dabai, K., Sahabi, B., & Mode, A. (2026). Comparative Performance Analysis of RC-Coupled, Transformer-Coupled, and Direct-Coupled Common-Emitter Transistor Amplifiers Using Multisim 11.0. Journal of Electrical and Electronic Engineering, 14(4), 196-210. https://doi.org/10.11648/j.jeee.20261404.12

Vancouver

Abdullahi Y, Saidu I, Abdullahi M, Dabai K, Sahabi B, Mode A. Comparative Performance Analysis of RC-Coupled, Transformer-Coupled, and Direct-Coupled Common-Emitter Transistor Amplifiers Using Multisim 11.0. Journal of Electrical and Electronic Engineering. 2026;14(4):196-210. doi:10.11648/j.jeee.20261404.12

BibTeX
@article{Abdullahi2026,
  author = {Abdullahi, Yusuf and Saidu, Ismail and Abdullahi, Muhammad and Dabai, Kabir and Sahabi, Buhari and Mode, Aisha},
  title = {Comparative Performance Analysis of RC-Coupled, Transformer-Coupled, and Direct-Coupled Common-Emitter Transistor Amplifiers Using Multisim 11.0},
  journal = {Journal of Electrical and Electronic Engineering},
  year = {2026},
  volume = {14},
  number = {4},
  pages = {196--210},
  doi = {10.11648/j.jeee.20261404.12}
}
Kostenlos starten →