An Assessment of Physicochemical Characteristics and Heavy Metals Concentrations of Effluent Water Discharge in Plastic – Sand Brick Production
International Journal of Environmental Protection and Policy · 29.12.2025 · 13 (6) · 174-181
DOI: 10.11648/j.ijepp.20251306.14 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Environmental Protection and Policy, online erschienen am 29.12.2025. Verfasst von Brown-Ubak Michael und 1 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.
Abstract (Originalsprache)
The physicochemical parameters and heavy metals concentrations of effluent water discharge during production of plastic – sand bricks were examined. The samples were collected in sterile containers from the recycled wastewater collector system and was bench marked with a controlled water sample collected from the Institute of Pollution Studies laboratory, Rivers State University campus. The containers were first rinsed with the sample water before the final collection. The samples collected were taken in an iced - packed cooler to the Institute of Pollution Studies laboratory, Rivers State University, Port Harcourt, where the analysis was performed. The physicochemical parameters analysis results show that temperature (28.90°C), Turbidity (114 NTU), Conductivity level (48.4 µS/cm), Salinity (0.05 mg/l), Total Dissolved Solids, TDS, (81mg/l), Total Hardness level (15.3 mg/l) and alkalinity level (2 mg/l) are within the regulatory authority allowed limits although pH level of 5.04 for the plastic brick effluent was too acidic. Metallic ions such as Chloride (4.5 mg/l), Sulphate (3.21 mg/l), Nitrate (1.35 mg/l), Phosphate (0.08 mg/l), Manganese (
Zitieren
APA
Michael, B., & Kio, I. (2025). An Assessment of Physicochemical Characteristics and Heavy Metals Concentrations of Effluent Water Discharge in Plastic – Sand Brick Production. International Journal of Environmental Protection and Policy, 13(6), 174-181. https://doi.org/10.11648/j.ijepp.20251306.14
Vancouver
Michael B, Kio I. An Assessment of Physicochemical Characteristics and Heavy Metals Concentrations of Effluent Water Discharge in Plastic – Sand Brick Production. International Journal of Environmental Protection and Policy. 2025;13(6):174-181. doi:10.11648/j.ijepp.20251306.14
BibTeX
@article{Michael2025,
author = {Michael, Brown-Ubak and Kio, Ideriah},
title = {An Assessment of Physicochemical Characteristics and Heavy Metals Concentrations of Effluent Water Discharge in Plastic – Sand Brick Production},
journal = {International Journal of Environmental Protection and Policy},
year = {2025},
volume = {13},
number = {6},
pages = {174--181},
doi = {10.11648/j.ijepp.20251306.14}
}
EUVIMED