EUVIMEDEUVIMED entdecken
Crossref

Evaluation of Sugar Cane Harvester and Cutter

Gizachew Tefera

Engineering and Applied Sciences · 09.06.2023 · 8 (2) · 31-35

DOI: 10.11648/j.eas.20230802.12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering and Applied Sciences, online erschienen am 09.06.2023. Verfasst von Gizachew Tefera. Die Arbeit nennt 17 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sugarcane is widely cultivated in sub-Saharan Africa (SSA), particularly in Ethiopia. According to Central Statistics Agency (CSA) of Ethiopia, 1,090,575 households cultivated sugarcane in about 29,536.49 hectares of land and 13,470,350.06 productions in quintals and in Oromia region 324,526.00 households grew sugarcane and 3,162,239.03 productions in quintals. Sugarcane harvesting is a process of cutting and detaching of matured sugarcane from the field. Manual harvesting causes fatigue due to excessive stress on the joints and muscles and are exposed to harmful pests from plantations, creating safety concerns. Harvesting by machine makes green sugarcane harvesting possible, which reduces Green House Gas emissions from pre-harvest burning necessitated by manual harvesting. Result analysis indicate that the cutting capacity of sugar cane cuter machine was significantly affected by engine motor speed, sugarcane feed rate. The thoroughgoing cutting capacity of 1200.7 (stoke/h) was noted when the machine motor speed was 400 rpm and the feed amount of 3 (stoke/min). The thoroughgoing cutting effectiveness of 99.48% was recorded when the machine was worked at speed of 400 rpm and at feed amount of 2 (stoke/min). Gas ingesting of the cutting machine amplified with in increment of machine speeds and surge with increments of feed rates (from 100.33 to 124.33 ml/stoke with engine speed of 300 and 400 rpm and the feeding rate of 1, 2 and 3 stoke/min). Rise in the engine swiftness resulted in declined cutting efficiency. This could be due to the very fact that at higher engine speed the energy imparted to the sugarcane was high and hence causing disturbance for harmonic motion which leads to decline cutting uniformity. Thoroughgoing cutting uniformity 99.99% was observed when the machine was operated at engine speed of 300 rpm and at feed rate of 1 (stoke/min). The average cut height (mm) remains on ground, Forward speed (km/hr), Actual width of cut (mm), Theoretical field capacity (ha/hr), Actual field capacity (ha/hr) and Field efficiency (%) were 50.75, 2.18, 600,1.31, 0.69 and 52.67 respectively.

Zitieren

APA

Tefera, G. (2023). Evaluation of Sugar Cane Harvester and Cutter. Engineering and Applied Sciences, 8(2), 31-35. https://doi.org/10.11648/j.eas.20230802.12

Vancouver

Tefera G. Evaluation of Sugar Cane Harvester and Cutter. Engineering and Applied Sciences. 2023;8(2):31-35. doi:10.11648/j.eas.20230802.12

BibTeX
@article{Tefera2023,
  author = {Tefera, Gizachew},
  title = {Evaluation of Sugar Cane Harvester and Cutter},
  journal = {Engineering and Applied Sciences},
  year = {2023},
  volume = {8},
  number = {2},
  pages = {31--35},
  doi = {10.11648/j.eas.20230802.12}
}
Kostenlos starten →