Surface Modification of Ti-6Al-4V Alloy by Composite Coating of Polycaprolactone Nanofibers-Fluoroapatite Nanoparticles Doped with Silicon and Magnesium
Composite Materials · 11.09.2024 · 8 (2) · 22-29
DOI: 10.11648/j.cm.20240802.11 ↗Kurz gefasst
Fachartikel in der Zeitschrift Composite Materials, online erschienen am 11.09.2024. Verfasst von Nasim Amjad und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.
Abstract (Originalsprache)
The purpose of this research was to create polycaprolactone nanocomposite coating - fluor apatite nanoparticles doped with silicon and magnesium, as well as polycaprolactone coating on the alloy in order to improve and modify the biological properties of this alloy. For this purpose, nano composite coating and polycaprolactone coating were first created by immersion methode. Then the physical, corrosion and biological properties of the coating created by different methods were investigated. The results indicated the creation of a uniform nanocomposite coating with a thickness of about 6.26 micrometers, with appropriate structure and phases, and an increase in roughness by adding nanoparticles to the polycaprolactone coating. Electrochemical measurements Ti 6 Al 4 V showed that the sample coated with polycaprolactone with nanoparticles has polarization RP=5.349×10 5 Ωcm 2 resistance, which is higher than the sample coated with caprolactone with polarization resistance RP=1.191×10 5 Ωcm 2 and the sample without coating with polarization resistance RP=5.2453×104 Ωcm 2 . Cytotoxicity test showed the non-cytotoxicity of the coatings. Also, the cell growth and proliferation of the sample with nano composite coating compared to the sample without coating has a statistically significant difference. Cell adhesion on the sample with nanocomposite coating was also much better than the sample without coating and the sample with polycaprolactone coating.
Zitieren
APA
Amjad, N., Sadeghi, M., Mirbagheri, M., & Vahdat, K. (2024). Surface Modification of Ti-6Al-4V Alloy by Composite Coating of Polycaprolactone Nanofibers-Fluoroapatite Nanoparticles Doped with Silicon and Magnesium. Composite Materials, 8(2), 22-29. https://doi.org/10.11648/j.cm.20240802.11
Vancouver
Amjad N, Sadeghi M, Mirbagheri M, Vahdat K. Surface Modification of Ti-6Al-4V Alloy by Composite Coating of Polycaprolactone Nanofibers-Fluoroapatite Nanoparticles Doped with Silicon and Magnesium. Composite Materials. 2024;8(2):22-29. doi:10.11648/j.cm.20240802.11
BibTeX
@article{Amjad2024,
author = {Amjad, Nasim and Sadeghi, Mahshid and Mirbagheri, Mahshad and Vahdat, Khadijeh},
title = {Surface Modification of Ti-6Al-4V Alloy by Composite Coating of Polycaprolactone Nanofibers-Fluoroapatite Nanoparticles Doped with Silicon and Magnesium},
journal = {Composite Materials},
year = {2024},
volume = {8},
number = {2},
pages = {22--29},
doi = {10.11648/j.cm.20240802.11}
}
EUVIMED