EUVIMEDEUVIMED entdecken
Crossref

Effects of Electrolyte Concentrations and Annealing on Some Surface Characteristics of Optimised Electrochemical Deposited Tin-(II)-Sulphide (SnS) Thin Films

Akangbe Lasisi, Samuel Temaugee, Abubakar Dangana, Alimi Taofeek, Umar Abubakar

Advances in Materials · 07.04.2026 · 15 (2) · 27-36

DOI: 10.11648/j.am.20261502.11 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Materials, online erschienen am 07.04.2026. Verfasst von Akangbe Lasisi und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study set out to address the issue of having cost effective and environmental benign material as absorber layer of thin film solar cells. Thus, the study reported the results of some surface characterization of optimized two-electrode electrochemical deposited Tin-(II)-Sulphide (SnS) thin films. The films were prepared from analytical grade chemical salts of tin (II) tetraoxosulphate (VI) [SnSO 4 ] and sodium thiosulphate pentahydrate [Na 2 S 2 O 3 .5H 2 O]. They were deposited on ITO coated glass. Some samples were annealed in a Carbonite cylindrical tube furnace at 350°C for one (1) hour under an inert argon atmosphere. The samples (as-deposited and annealed) were then characterized using X-Ray Diffraction (XRD) for structural analysis while surface morphology was determined using Scanning Electron Microscopy (SEM). The data obtained were analyzed using Origin version 2018 to obtain diffraction patterns and three dimension (3D) interactive surface plots of the micrographs were performed using ImageJ software. The results reveal that two-electrode electrochemical deposition technique is a suitable technique for depositing optimum SnS for photon absorption and that, both electrolyte concentration and annealing have positive influence on the structure and morphology of the film. The film intensity, crystallinity and phase purification increase with electrolyte concentration while annealing enhance the grain size and surface uniformity of the films. Thus, it was recommended that, the SnS thin films for photovoltaic application should be prepared from optimum electrolyte concentration using two-electrode electrochemical deposition method and annealed at 350°C in inert environment for the fabrication of thin film solar cells.

Zitieren

APA

Lasisi, A., Temaugee, S., Dangana, A., Taofeek, A., & Abubakar, U. (2026). Effects of Electrolyte Concentrations and Annealing on Some Surface Characteristics of Optimised Electrochemical Deposited Tin-(II)-Sulphide (SnS) Thin Films. Advances in Materials, 15(2), 27-36. https://doi.org/10.11648/j.am.20261502.11

Vancouver

Lasisi A, Temaugee S, Dangana A, Taofeek A, Abubakar U. Effects of Electrolyte Concentrations and Annealing on Some Surface Characteristics of Optimised Electrochemical Deposited Tin-(II)-Sulphide (SnS) Thin Films. Advances in Materials. 2026;15(2):27-36. doi:10.11648/j.am.20261502.11

BibTeX
@article{Lasisi2026,
  author = {Lasisi, Akangbe and Temaugee, Samuel and Dangana, Abubakar and Taofeek, Alimi and Abubakar, Umar},
  title = {Effects of Electrolyte Concentrations and Annealing on Some Surface Characteristics of Optimised Electrochemical Deposited Tin-(II)-Sulphide (SnS) Thin Films},
  journal = {Advances in Materials},
  year = {2026},
  volume = {15},
  number = {2},
  pages = {27--36},
  doi = {10.11648/j.am.20261502.11}
}
Kostenlos starten →