EUVIMEDEUVIMED entdecken
Crossref

Numerical Simulation of the Performance of an Amorphous Silicon-based Photovoltaic Solar Cell as a Function of Absorber Layer Thickness and Temperature

Daouda Oubda, Boureima Sawadogo, Soumaila Ouedraogo, Hamidou Barry, Pingdewinde Sawadogo

American Journal of Science, Engineering and Technology · 09.11.2026 · 11 (4) · 497-503

DOI: 10.11648/j.ajset.20261104.39 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Journal of Science, Engineering and Technology, online erschienen am 09.11.2026. Verfasst von Daouda Oubda und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In a global context characterized by steadily rising energy demand, dwindling fossil fuel resources, and escalating environmental concerns, the transition to clean, sustainable alternative energy sources is critical. This study addresses this challenge by numerically simulating the performance of an amorphous silicon-based (a-Si) solar cell, aiming to optimize the thickness of the i(a-Si(p): H) absorber layer and the operating temperature to achieve a highly efficient and stable photovoltaic structure. To this end, a Substrat/Right contact (ZnO)/a-Si(p)/i-a-Si(P)/a-Si(n)/Left contact configuration was modeled and simulated using the Solar Cell Capacitance Simulator-1D (SCAPS-1D) software. The numerical results demonstrate that increasing the thickness of the i(a-Si(p): H) layer enhances all photovoltaic electrical parameters. Conversely, with the exception of the short-circuit current density, these parameters degrade as the operating temperature rises. This indicates that a thicker absorber layer ameliorates the absorption of incident photons, effectively converting them into electron-hole pairs and collected at the contacts. Whereas elevated temperatures accelerate carrier recombination within the space-charge region. Under optimized conditions an absorber thickness of 5000 nm at an operating temperature of 300 K, the device achieves an open-circuit voltage of 0.94 V, a short-circuit current density of 32.30 mA/cm 2 , a fill factor of 86.88%, and a power conversion efficiency (η) of 26.41%. With the aim of developing stable, high-performance, lightweight, and high-efficiency a-Si(H)-based PV solar cells, we have selected an absorber layer thickness of 2.5 µm, an energy gap of 1.72 eV, and an operating temperature of 300 K. Under these conditions, we obtain the following electrical parameters: V OC =1.21 V, J SC = 20.14 mA/cm 2 , FF= 86.94%, η= 21.17%. In future studies, we will investigate the effects of electron affinity and bandgap variations within the i(a-Si(p): H) absorber layer.

Zitieren

APA

Oubda, D., Sawadogo, B., Ouedraogo, S., Barry, H., & Sawadogo, P. (2026). Numerical Simulation of the Performance of an Amorphous Silicon-based Photovoltaic Solar Cell as a Function of Absorber Layer Thickness and Temperature. American Journal of Science, Engineering and Technology, 11(4), 497-503. https://doi.org/10.11648/j.ajset.20261104.39

Vancouver

Oubda D, Sawadogo B, Ouedraogo S, Barry H, Sawadogo P. Numerical Simulation of the Performance of an Amorphous Silicon-based Photovoltaic Solar Cell as a Function of Absorber Layer Thickness and Temperature. American Journal of Science, Engineering and Technology. 2026;11(4):497-503. doi:10.11648/j.ajset.20261104.39

BibTeX
@article{Oubda2026,
  author = {Oubda, Daouda and Sawadogo, Boureima and Ouedraogo, Soumaila and Barry, Hamidou and Sawadogo, Pingdewinde},
  title = {Numerical Simulation of the Performance of an Amorphous Silicon-based Photovoltaic Solar Cell as a Function of Absorber Layer Thickness and Temperature},
  journal = {American Journal of Science, Engineering and Technology},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {497--503},
  doi = {10.11648/j.ajset.20261104.39}
}
Kostenlos starten →