EUVIMEDEUVIMED entdecken
Crossref

Design of Ergonomic Harmonica Wire Forming Tools to Increase Work Productivity of Harmonica Fence Craftsmen

Gede Oka Pujihadi, I Komang Rusmariadi, I Putu Sastra Negara, I Ketut Gde Juli Suarbawa, M. Yusuf

American Journal of Science, Engineering and Technology · 31.10.2023 · 8 (4) · 194-198

DOI: 10.11648/j.ajset.20230804.13 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Journal of Science, Engineering and Technology, online erschienen am 31.10.2023. Verfasst von Gede Oka Pujihadi und 4 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A harmonica fence is a type of fence made of steel wire that is zigzaggingly assembled into a harmonica. Making harmonica fences requires appropriate wire forming tools so that the results can be more precise and consistent. Formation of harmonica wire using the bending method. Bending is a job by applying pressure to certain parts so that plastic deformation occurs in the pressurized part. Harmonica wire is often used for daily needs, such as house fences, land area fences, livestock fences (cattle, chickens, and goats). Making harmonica wire still uses manual methods and requires labor, patience and a long time. This research aims to develop an effective and efficient harmonica wire forming tool to increase the productivity of craftsmen. This research uses an experimental approach in the form of tool development which includes the stages of needs analysis, tool design, prototyping, trials, and evaluation. Workload is calculated based on the worker's pulse, production yield is measured based on the length of the harmonica wire produced, and work productivity is calculated based on the ratio between output (production output) and input (workload) multiplied by his working time. The results showed that there was a decrease in workload and a significant increase in production results and work productivity between using the old method manually and using a new way, namely using ergonomic chain wire forming tools. Workload decreased by 10.3%. Production output increased by 59.8%, while labor productivity increased by 78.7%. Therefore, it is recommended that harmonica wire craftsmen use ergonomic harmonica wire forming tools.

Zitieren

APA

Pujihadi, G. O., Rusmariadi, I. K., Negara, I. P. S., Suarbawa, I. K. G. J., & Yusuf, M. (2023). Design of Ergonomic Harmonica Wire Forming Tools to Increase Work Productivity of Harmonica Fence Craftsmen. American Journal of Science, Engineering and Technology, 8(4), 194-198. https://doi.org/10.11648/j.ajset.20230804.13

Vancouver

Pujihadi GO, Rusmariadi IK, Negara IPS, Suarbawa IKGJ, Yusuf M. Design of Ergonomic Harmonica Wire Forming Tools to Increase Work Productivity of Harmonica Fence Craftsmen. American Journal of Science, Engineering and Technology. 2023;8(4):194-198. doi:10.11648/j.ajset.20230804.13

BibTeX
@article{Pujihadi2023,
  author = {Pujihadi, Gede Oka and Rusmariadi, I Komang and Negara, I Putu Sastra and Suarbawa, I Ketut Gde Juli and Yusuf, M.},
  title = {Design of Ergonomic Harmonica Wire Forming Tools to Increase Work Productivity of Harmonica Fence Craftsmen},
  journal = {American Journal of Science, Engineering and Technology},
  year = {2023},
  volume = {8},
  number = {4},
  pages = {194--198},
  doi = {10.11648/j.ajset.20230804.13}
}
Kostenlos starten →