Investigation of maximum molar point on green hydrogen production using power electronic converter
Bulletin of Electrical Engineering and Informatics · 01.12.2026 · 15 (6) · 4825-4836
DOI: 10.11591/eei.v15i6.12094 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of Electrical Engineering and Informatics, online erschienen am 01.12.2026. Verfasst von Ahmad Rosyid Idris und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Green hydrogen production using photovoltaic (PV)-powered electrolysis is challenged by intermittent irradiance, which changes the electrical operating point of the electrolyzer. This study investigates the maximum molar point (MMP) as a hydrogen-oriented operating concept for a PV–buck–proton exchange membrane (PEM) electrolyzer system. A dual-loop proportional–integral (PI) controller regulates the electrolyzer voltage and current, while the MMP is identified separately through duty-cycle characterization. The final model uses one 1Soltech 1STH-220-P PV module and a 50 kHz buck converter. A two-stage duty-cycle sweep identifies a near-maximum hydrogen-production region at D=0.75–0.85, with approximately 2.53710-5 mol/s at 1,000 W/m². Under irradiance levels from 600 to 1,000 W/m², MMP-oriented operation increases mean hydrogen production by 20.66–73.91% relative to conventional perturb-and-observe (P&O) maximum power point tracking (MPPT). The average hydrogen-production rate increases from 1.4386×10-5 mol/s for MPPT to 2.2458×10-5 mol/s for MMP-oriented operation, corresponding to an average improvement of 55.88%, while the average coefficient of variation (CV) decreases from 0.830% to 0.081%. The results demonstrate the potential of shifting the optimization objective from PV power toward hydrogen production; adaptive online MMP tracking, temperature/degradation effects, and parameter-robustness analysis remain future work.
Zitieren
APA
Idris, A. R., Samman, F. A., Achmad, A., Lukman, M. P., & Taha, S. (2026). Investigation of maximum molar point on green hydrogen production using power electronic converter. Bulletin of Electrical Engineering and Informatics, 15(6), 4825-4836. https://doi.org/10.11591/eei.v15i6.12094
Vancouver
Idris AR, Samman FA, Achmad A, Lukman MP, Taha S. Investigation of maximum molar point on green hydrogen production using power electronic converter. Bulletin of Electrical Engineering and Informatics. 2026;15(6):4825-4836. doi:10.11591/eei.v15i6.12094
BibTeX
@article{Idris2026,
author = {Idris, Ahmad Rosyid and Samman, Faizal Arya and Achmad, Alamsyah and Lukman, Musfirah Putri and Taha, Syamsumarlin},
title = {Investigation of maximum molar point on green hydrogen production using power electronic converter},
journal = {Bulletin of Electrical Engineering and Informatics},
year = {2026},
volume = {15},
number = {6},
pages = {4825--4836},
doi = {10.11591/eei.v15i6.12094}
}
EUVIMED