EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Fault detection and diagnosis in three phase IM using DSP: hardware implementation and real-time approach

Mohan P. Thakre, Badal Kumar, Supriya Nilesh Thakur, Alok Kumar, Padmini Sharma, Prashant Kedarnath Magadum

Bulletin of Electrical Engineering and Informatics · 01.08.2026 · 15 (4) · 2920-2934

DOI: 10.11591/eei.v15i4.12131 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of Electrical Engineering and Informatics, online erschienen am 01.08.2026. Verfasst von Mohan P. Thakre und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study investigates real-time problem diagnosis of induction motors (IMs) with digital signal processing (DSP) to improve monitoring. IMs are essential to industrial applications but can fail owing to mechanical, electrical, and thermal stressors. These defects must be detected quickly to prevent motor failure and production downtime. DSP is used to create a sophisticated real-time online condition monitoring system to diagnose three-phase IM issues. The suggested system was validated using MATLAB calculations and experimental investigations on a 415 V, 1 HP, 50 Hz, 1440 rpm, 4-pole IM. Disruptions in the stator windings, such as inter-turn short circuits or inter-phase faults, as well as problems with the rotor, such as broken bars or end rings, are identified in this investigation. Keeping an eye on negative sequence currents and analyzing fault frequencies with a fast Fourier transform (FFT). According to the results of the testing, current approaches are not very good at detecting stator inter-turn difficulties under light-load and no-load conditions. Under varying loads, the proposed DSP-based system identified stator inter-turn, inter-phase, and broken rotor bar problems. Results showed that the DSP-based online condition monitoring system was more accurate and better at detecting faults than earlier methods, making it a good fit for usage in industrial applications.

Zitieren

APA

Thakre, M. P., Kumar, B., Thakur, S. N., Kumar, A., Sharma, P., & Magadum, P. K. (2026). Fault detection and diagnosis in three phase IM using DSP: hardware implementation and real-time approach. Bulletin of Electrical Engineering and Informatics, 15(4), 2920-2934. https://doi.org/10.11591/eei.v15i4.12131

Vancouver

Thakre MP, Kumar B, Thakur SN, Kumar A, Sharma P, Magadum PK. Fault detection and diagnosis in three phase IM using DSP: hardware implementation and real-time approach. Bulletin of Electrical Engineering and Informatics. 2026;15(4):2920-2934. doi:10.11591/eei.v15i4.12131

BibTeX
@article{Thakre2026,
  author = {Thakre, Mohan P. and Kumar, Badal and Thakur, Supriya Nilesh and Kumar, Alok and Sharma, Padmini and Magadum, Prashant Kedarnath},
  title = {Fault detection and diagnosis in three phase IM using DSP: hardware implementation and real-time approach},
  journal = {Bulletin of Electrical Engineering and Informatics},
  year = {2026},
  volume = {15},
  number = {4},
  pages = {2920--2934},
  doi = {10.11591/eei.v15i4.12131}
}
Kostenlos starten →