Thermal mode modeling using neural network technologies and the finite element method
Bulletin of Electrical Engineering and Informatics · 01.04.2026 · 15 (2) · 1821-1834
DOI: 10.11591/eei.v15i2.11268 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of Electrical Engineering and Informatics, online erschienen am 01.04.2026. Verfasst von Nazarbek Mussabekov und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
This study presents the analysis and modeling of the thermal regime of a furnace lining at an industrial copper smelting facility using a combined approach based on neural network (NN) technologies and the finite element method (FEM). Experimental temperature data were collected from a laboratory setup equipped with three thermocouples (TP-2488/1 and TCRosemount 0065), with a sampling frequency of 1 Hz over a total duration of 5 hours, resulting in 18,000 measurement points. The measurement uncertainty of the thermocouples did not exceed ±1.5 °C. These data were used both for model development and for validating the numerical FEM simulations. A feedforward neural network was trained using 70% of the dataset, while 15% and 15% were used for validation and testing, respectively. The prediction error of the neural network remained within 3% with a 95% confidence interval of [2.6%, 3.4%]. The results show that the proposed hybrid approach improves temperature prediction accuracy and reduces static control error by 15% when combined with a proportional-integral controller. The methodology demonstrates significant potential for improving thermal process stability and reducing energy consumption in high-temperature metallurgical systems.
Zitieren
APA
Mussabekov, N., Utepbergenov, I., Kaliyev, Z., Issayeva, Z., Ybytayeva, G., Ansabekova, G., Karnakova, G., & Butabaeva, K. (2026). Thermal mode modeling using neural network technologies and the finite element method. Bulletin of Electrical Engineering and Informatics, 15(2), 1821-1834. https://doi.org/10.11591/eei.v15i2.11268
Vancouver
Mussabekov N, Utepbergenov I, Kaliyev Z, Issayeva Z, Ybytayeva G, Ansabekova G, et al. Thermal mode modeling using neural network technologies and the finite element method. Bulletin of Electrical Engineering and Informatics. 2026;15(2):1821-1834. doi:10.11591/eei.v15i2.11268
BibTeX
@article{Mussabekov2026,
author = {Mussabekov, Nazarbek and Utepbergenov, Irbulat and Kaliyev, Zhanybek and Issayeva, Zhazira and Ybytayeva, Galiya and Ansabekova, Gulbakyt and Karnakova, Gayni and Butabaeva, Karlygash},
title = {Thermal mode modeling using neural network technologies and the finite element method},
journal = {Bulletin of Electrical Engineering and Informatics},
year = {2026},
volume = {15},
number = {2},
pages = {1821--1834},
doi = {10.11591/eei.v15i2.11268}
}
EUVIMED