EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Physiochemical and Thermal Characterization of Municipal Solid Waste and Agricultural Residue Blends for Torrefaction

Ibrahim Luqman Mpungu iD, Josphat Igadwa Mwasiagi iD, Benson Dulo iD, Obadiah Maube iD, Patrick Nziu iD, Ocident Bongomin iD

The Scientific World Journal · 2026-01 · 2026 (1)

DOI: 10.1155/tswj/3310369 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Scientific World Journal, online erschienen am 21.04.2026. Verfasst von Ibrahim Luqman Mpungu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Manufacturing, Textile and Industrial Engineering, School of Engineering, Moi University, P.O. Box 3900, Eldoret, Kenya, mu.ac.ke. Hauptthemen laut MEDLINE: Solid Waste, Agriculture, Refuse Disposal. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Municipal solid waste (MSW), together with other biomass resources, presents a viable feedstock for renewable energy production; however, its direct conversion is limited by high moisture content, ash content, and heterogeneous composition. These challenges can be mitigated through torrefaction, provided that suitable feedstock selection and optimization are achieved. This study investigates the physicochemical and thermal characteristics of MSW, coffee husks (CH), corn cobs (CC), and their blends to demonstrate how biomass quality can be improved through blending. MSW was blended with CH or CC at mass ratios of 25:75, 50:50, and 75:25 (db/db%). Proximate, ultimate, lignocellulosic, thermogravimetric, and calorific value analyses were conducted. Proximate analysis showed that MSW had the highest moisture (10.102 ± 0.141%), volatile matter (71.115 ± 0.759%), and ash content (6.674 ± 0.477%), whereas CH exhibited the highest fixed carbon content (18.863 ± 0.572%). Ultimate analysis revealed that MSW contained the highest hydrogen content (6.911 ± 0.183%), CH had the highest carbon content (50.001 ± 0.184%), and CC showed the highest oxygen (44.185 ± 0.273%), nitrogen (1.395 ± 0.045%), and sulfur (0.057 ± 0.035%) contents. MSW had the lowest hemicellulose (11.941 ± 0.269%) and cellulose (19.334 ± 0.294%) contents, while CC had the lowest lignin content (12.304 ± 0.219%). The calorific value of MSW (17.01 ± 0.292 MJ kg −1 ) increased upon blending, reaching up to 17.59 ± 0.241 MJ kg −1 . Thermogravimetric analysis indicated enhanced thermal degradation rates with increasing MSW content in the blends. In conclusion, blending MSW with agricultural residues significantly improves its physicochemical and thermal properties, enhancing its suitability for torrefaction. The 25MSW75CH blend demonstrated the most favorable characteristics and is recommended as an optimal feedstock for torrefaction‐based waste‐to‐energy applications at industrial scale.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Solid WasteAgricultureRefuse DisposalThermogravimetryBiomassIncinerationLigninZea mays

Stichwörter der Autor:innen

characterizationcoffee huskcorn cobsmunicipal solid wastetorrefaction

Substanzen

Solid WasteLignin

Autor:innen und Institutionen

  • Department of Manufacturing, Textile and Industrial Engineering, School of Engineering, Moi University, P.O. Box 3900, Eldoret, Kenya, mu.ac.ke.
  • Department of Technical Teacher and Instructor Education, School of Education, Kyambogo University, P.O. Box 1, Kyambogo, Uganda, kyu.ac.ug.
  • African Centre of Excellence II in Phytochemical, Textile, and Renewable Energy (ACE II PTRE), Moi University, P.O. Box 3900-30100, Eldoret, Kenya, mu.ac.ke.
  • Department of Industrial and Mechatronics Engineering, School of Mechanical and Manufacturing Engineering, Technical University of Kenya, P.O. Box 52428-00200, Nairobi, Kenya, tukenya.ac.ke.
  • Department of Mechanical Engineering, Walter Sisulu University, P.O. Box 1421 East London 5200, Mthatha, South Africa, wsu.ac.za.

ORCID-Profile: Ibrahim Luqman Mpungu, Josphat Igadwa Mwasiagi, Benson Dulo, Obadiah Maube, Patrick Nziu, Ocident Bongomin

Zitieren

APA

Mpungu, I. L., Mwasiagi, J. I., Dulo, B., Maube, O., Nziu, P., & Bongomin, O. (2026). Physiochemical and Thermal Characterization of Municipal Solid Waste and Agricultural Residue Blends for Torrefaction. The Scientific World Journal, 2026(1). https://doi.org/10.1155/tswj/3310369

Vancouver

Mpungu IL, Mwasiagi JI, Dulo B, Maube O, Nziu P, Bongomin O. Physiochemical and Thermal Characterization of Municipal Solid Waste and Agricultural Residue Blends for Torrefaction. The Scientific World Journal. 2026;2026(1). doi:10.1155/tswj/3310369

BibTeX
@article{Mpungu2026,
  author = {Mpungu, Ibrahim Luqman and Mwasiagi, Josphat Igadwa and Dulo, Benson and Maube, Obadiah and Nziu, Patrick and Bongomin, Ocident},
  title = {Physiochemical and Thermal Characterization of Municipal Solid Waste and Agricultural Residue Blends for Torrefaction},
  journal = {The Scientific World Journal},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/tswj/3310369}
}
Kostenlos starten →