EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D‐Printed Triply Periodic Minimal Surface Ceramic Scaffold Loaded With Bone Morphogenetic Protein‐2 and Zoledronic for Cranium Defect Repairment

Junteng Yan, Shuhao Qi, Yiwei Zhao, Peng Tian, Ning Kong, Weigang Ma, Peng Yan, Jiewen Zhang, Xu Gao, Huanshuai Guan, Pei Yang, Qin Lian iD und 1 weitere

Journal of Tissue Engineering and Regenerative Medicine · 2025-01 · 2025 (1)

DOI: 10.1155/term/9964384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Tissue Engineering and Regenerative Medicine, online erschienen am 26.05.2025. Verfasst von Junteng Yan und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bone and Joint Surgery, Second Affiliated Hospital of Xi'an Jiaotong University, Xi'an 710054, Shaanxi, China. Hauptthemen laut MEDLINE: Tissue Scaffolds, Bone Morphogenetic Protein 2, Skull, Printing, Three-Dimensional. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Research and Development Projects of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Managing large, critical‐sized bone defects poses a complex challenge, especially when autografts are impractical due to their size and limited availability. In such situations, the development of synthetic bone implants becomes crucial. These implants can be carefully designed and manufactured as potential bone substitutes, offering controlled parameters such as porosity, hardness, and osteogenic cues. In this study, we employed digital light processing (DLP) technology to construct an alumina ceramic scaffold featuring a triply periodic minimal surface (TPMS) structure for bone transplantation. The scaffold was filled with type I collagen to enhance cell infiltration [1], thereby increasing the total surface area. In addition, type I collagen is a carrier for both bone morphogenetic protein‐2 (BMP‐2) and zoledronic acid (ZA). Using a clinically relevant rabbit cranium defect model, the scaffold underwent in vivo assessment for its functionality in repairing critical‐sized bone defect (approximately 8 mm). Four groups of animal experiments were carried out including the control group, the gyroid scaffold group, the type I collagen‐loaded scaffold group, and the bioactive factor‐functionalized scaffold group. Our animal‐based study results revealed that the gyroid scaffold, functionalized with bioactive molecules, provided a conductive surface for promoting increased bone formation and enhancing the healing process in critical‐sized long bone and cranium defects. These findings offer preclinical evidence, supporting the use of a TPMS structure composite scaffold and present compelling support for its application as an advanced synthetic bone substitute in the future.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsBone Morphogenetic Protein 2SkullPrinting, Three-DimensionalCeramicsDiphosphonatesImidazolesWound HealingAnimalsRabbitsZoledronic Acid

Stichwörter der Autor:innen

additive manufacturingbioactive materialsdigital light processingosteogenesisrabbit cranial defectstissue engineeringtriply periodic minimal surface

Substanzen

Bone Morphogenetic Protein 2Zoledronic AcidDiphosphonatesImidazoles

Autor:innen und Institutionen

  • Department of Bone and Joint Surgery, Second Affiliated Hospital of Xi'an Jiaotong University, Xi'an 710054, Shaanxi, China.
  • State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

ORCID-Profile: Qin Lian, Kunzheng Wang

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Projects of Shaanxi Province

Zitieren

APA

Yan, J., Qi, S., Zhao, Y., Tian, P., Kong, N., Ma, W., Yan, P., Zhang, J., Gao, X., Guan, H., Yang, P., Lian, Q., & Wang, K. (2025). 3D‐Printed Triply Periodic Minimal Surface Ceramic Scaffold Loaded With Bone Morphogenetic Protein‐2 and Zoledronic for Cranium Defect Repairment. Journal of Tissue Engineering and Regenerative Medicine, 2025(1). https://doi.org/10.1155/term/9964384

Vancouver

Yan J, Qi S, Zhao Y, Tian P, Kong N, Ma W, et al. 3D‐Printed Triply Periodic Minimal Surface Ceramic Scaffold Loaded With Bone Morphogenetic Protein‐2 and Zoledronic for Cranium Defect Repairment. Journal of Tissue Engineering and Regenerative Medicine. 2025;2025(1). doi:10.1155/term/9964384

BibTeX
@article{Yan2025,
  author = {Yan, Junteng and Qi, Shuhao and Zhao, Yiwei and Tian, Peng and Kong, Ning and Ma, Weigang and Yan, Peng and Zhang, Jiewen and Gao, Xu and Guan, Huanshuai and Yang, Pei and Lian, Qin and Wang, Kunzheng},
  title = {3D‐Printed Triply Periodic Minimal Surface Ceramic Scaffold Loaded With Bone Morphogenetic Protein‐2 and Zoledronic for Cranium Defect Repairment},
  journal = {Journal of Tissue Engineering and Regenerative Medicine},
  year = {2025},
  volume = {2025},
  number = {1},
  doi = {10.1155/term/9964384}
}
Kostenlos starten →