Seismic Performance Assessment of Isolated Structures in Cold Regions: A Rate‐Dependent Large‐Strain Model for HDRBs
Structural Control and Health Monitoring · 2026-01 · 2026 (1)
DOI: 10.1155/stc/8034720 ↗Kurz gefasst
Fachartikel in der Zeitschrift Structural Control and Health Monitoring, online erschienen am 20.08.2026. Verfasst von Fubao Guo und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
High damping rubber bearings (HDRBs) serve as critical passive structural control devices in seismic isolation systems. However, accurately evaluating the control efficacy and reliability of these devices under extreme cold and large‐strain conditions remains a critical challenge. To address this, this study proposes a unified rheology‐based constitutive framework termed the Kikuchi Trilinear Generalized Maxwell Model (KT‐GMM). Developed within a nonlinear viscoelastic framework, the proposed model explicitly decouples and captures the complex interaction among rate‐dependent viscous dissipation, extreme temperature‐induced stiffening, and ultra‐large strain hyperelastic hardening. The KT‐GMM is calibrated and validated against an extensive experimental program on full‐scale HDRB specimens from 30°C down to −40°C, demonstrating maximum relative errors of 4.97% for equivalent shear modulus (ESM) and 10.74% for hysteretic energy density (HED) at extreme conditions. Furthermore, comprehensive nonlinear time‐history analyses of a base‐isolated building are conducted under varying seismic intensities. The structural evaluations quantify a critical “dual bias” inherent in traditional large‐strain models, particularly under extreme conditions (e.g., −40°C and 0.6 g): they systematically underestimate the transmitted ultimate base shear demands (by approximately 11%) while simultaneously overestimating the structural drift and isolation displacement requirements (by approximately 23%–51%). By linking bearing‐level constitutive mechanisms with structural response demands, the proposed KT‐GMM provides a computationally reliable framework for performance‐based seismic assessment and design of isolated structures in extreme cold regions.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Guo, F., Cheng, L., Liu, Y., Meng, W., & Luo, T. (2026). Seismic Performance Assessment of Isolated Structures in Cold Regions: A Rate‐Dependent Large‐Strain Model for HDRBs. Structural Control and Health Monitoring, 2026(1). https://doi.org/10.1155/stc/8034720
Vancouver
Guo F, Cheng L, Liu Y, Meng W, Luo T. Seismic Performance Assessment of Isolated Structures in Cold Regions: A Rate‐Dependent Large‐Strain Model for HDRBs. Structural Control and Health Monitoring. 2026;2026(1). doi:10.1155/stc/8034720
BibTeX
@article{Guo2026,
author = {Guo, Fubao and Cheng, Liang and Liu, Yanhui and Meng, Wanchen and Luo, Tao},
title = {Seismic Performance Assessment of Isolated Structures in Cold Regions: A Rate‐Dependent Large‐Strain Model for HDRBs},
journal = {Structural Control and Health Monitoring},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/stc/8034720}
}
EUVIMED