Crack Angle Estimation in Metallic Tubes by Eddy Current Testing and Gray Wolf Optimizer: A Finite Element Inverse Approach
Structural Control and Health Monitoring · 2026-01 · 2026 (1)
DOI: 10.1155/stc/5201253 ↗Kurz gefasst
Fachartikel in der Zeitschrift Structural Control and Health Monitoring, online erschienen am 03.11.2026. Verfasst von Mohamed Guesmi und 3 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
For the failure prediction in structures, it is essential to accurately estimate the geometric parameters, especially the crack. This paper presents a numerical simulation of eddy current testing (ECT) using the finite element method (FEM) to estimate the crack angle in a 2D axisymmetric cracked tube. FEM simulation was done for different crack angles, revealing a monotonic increase in normalized impedance with increasing crack angle. The relation between the sensor impedance and crack angle was expressed by a tangential fitting function with a high coefficient of determination ( R 2 = 0.99991) and low RMSE (0.167°). The fitted function can be employed as a direct technique to estimate the angle of a hidden crack for the sensor impedance. As a supportive alternative, the gray wolf optimizer (GWO) was used to optimize the crack angle using a measured normalized impedance value. The efficiency of the proposed technique was tested across seven crack angle cases covering the full range from 0° to 90°, with both methods achieving relative errors below 1% in all cases, demonstrating the reliable behavior of the proposed approach.
Zitieren
APA
Guesmi, M., Elbar, M., Bassir, D., & Tejani, G. G. (2026). Crack Angle Estimation in Metallic Tubes by Eddy Current Testing and Gray Wolf Optimizer: A Finite Element Inverse Approach. Structural Control and Health Monitoring, 2026(1). https://doi.org/10.1155/stc/5201253
Vancouver
Guesmi M, Elbar M, Bassir D, Tejani GG. Crack Angle Estimation in Metallic Tubes by Eddy Current Testing and Gray Wolf Optimizer: A Finite Element Inverse Approach. Structural Control and Health Monitoring. 2026;2026(1). doi:10.1155/stc/5201253
BibTeX
@article{Guesmi2026,
author = {Guesmi, Mohamed and Elbar, Mohamed and Bassir, David and Tejani, Ghanshyam G.},
title = {Crack Angle Estimation in Metallic Tubes by Eddy Current Testing and Gray Wolf Optimizer: A Finite Element Inverse Approach},
journal = {Structural Control and Health Monitoring},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/stc/5201253}
}
EUVIMED