EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Cable Force Optimization for Tied Arch Bridges Based on an Improved Multiobjective Bayesian Optimization Algorithm

Nannan Cui, Kun Sun, Junhao Wang, Jingwei Zhu, Shiping Huang

Structural Control and Health Monitoring · 2026-01 · 2026 (1)

DOI: 10.1155/stc/3556605 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Structural Control and Health Monitoring, online erschienen am 03.07.2026. Verfasst von Nannan Cui und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Among the numerous factors influencing the structural performance of tied arch bridges, optimizing cable forces in the completed bridge state is critical for achieving rational force distribution and smooth main girder alignment. Prior research on cable force optimization for tied arch bridges has primarily relied on traditional optimization methods or swarm intelligence techniques. Traditional approaches often require empirical adjustments to cable forces following initial solutions to attain an optimal structural state. In contrast, prevalent swarm intelligence methods typically employ response surface or influence matrix techniques to develop cable force response models, necessitating repeated invocations of finite element models for iterative computations. To address these challenges, this study proposes an improved multiobjective Bayesian optimization algorithm. This algorithm reduces computational expenses through sequential sampling and incorporates the sigmoid function—commonly used in neural networks—to select the cooling coefficient g, thereby enhancing the balance between global and local search capabilities. The algorithm was applied to a real tied arch bridge project, considering three objective functions: the sum of tensile‐compressive and bending strain energies in the arch rib and tie beam, the sum of squared vertical displacements of the main girder under dead loads, and the maximum stress in the arch rib. The Mahalanobis distance served as a key metric for evaluating the Pareto frontier, integrated with a finite element model for sequential sampling to construct the cable force optimization model. Results indicate that the improved multiobjective Bayesian optimization algorithm exhibits superior performance and efficacy, particularly in tackling complex multimodal optimization problems. It effectively balances global and local searches, thereby improving search efficiency. The optimized cable force combinations yield reasonable force distributions, smooth main girder alignments, and enhanced structural safety and stability. The scientific validity and efficiency of the proposed algorithm provide a valuable optimization tool for bridge engineering design and construction.

Zitieren

APA

Cui, N., Sun, K., Wang, J., Zhu, J., & Huang, S. (2026). Study on Cable Force Optimization for Tied Arch Bridges Based on an Improved Multiobjective Bayesian Optimization Algorithm. Structural Control and Health Monitoring, 2026(1). https://doi.org/10.1155/stc/3556605

Vancouver

Cui N, Sun K, Wang J, Zhu J, Huang S. Study on Cable Force Optimization for Tied Arch Bridges Based on an Improved Multiobjective Bayesian Optimization Algorithm. Structural Control and Health Monitoring. 2026;2026(1). doi:10.1155/stc/3556605

BibTeX
@article{Cui2026,
  author = {Cui, Nannan and Sun, Kun and Wang, Junhao and Zhu, Jingwei and Huang, Shiping},
  title = {Study on Cable Force Optimization for Tied Arch Bridges Based on an Improved Multiobjective Bayesian Optimization Algorithm},
  journal = {Structural Control and Health Monitoring},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/stc/3556605}
}
Kostenlos starten →