Characteristic of a Biodegradable Foam With Bagasse as a Filler
Scientifica · 2026-01 · 2026 (1)
DOI: 10.1155/sci5/2944462 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scientifica, online erschienen am 27.02.2026. Verfasst von Hernani Hernani und 9 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Process Technology, Research Organization for Energy and Manufacture, BRIN, Tangerang Selatan, Banten, Indonesia. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The main issue driving this research is the need to develop sustainable packaging materials that can replace conventional nonbiodegradable plastics. Traditional biodegradable foams often exhibit inadequate mechanical and thermal properties, which limit their practical use in food packaging. The study explores sustainable packaging alternatives using agricultural waste like sugarcane bagasse and polyvinyl alcohol (PVA) as a binder, aiming to improve structural integrity, reduce water absorption, and optimize performance, while also addressing the growing environmental demand for renewable and eco‐friendly packaging solutions. Various physical properties were assessed, including moisture content, density, thickness, water absorption, X‐ray diffraction (XRD), and scanning electron microscopy (SEM) morphology. The results indicated that the biofoam density ranged from 0.2282 to 0.2952 g/cm 3 , and thickness values were between 2.82 and 2.92 mm. Water absorption increased significantly after 2 min of immersion, while XRD analysis indicated a reduction in crystallinity with higher PVA concentrations. The morphology of the biofoam, including the shape, size, and distribution of pores, was influenced by the addition of PVA. A lower concentration of PVA led to an increase in the size of the pore holes. Among the formulations tested, the treatment with 35 g PVA (Formula 1) is recommended due to its superior mechanical strength, optimal density, and improved water resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Center for Process Technology, Research Organization for Energy and Manufacture, BRIN, Tangerang Selatan, Banten, Indonesia.
- Research Center for Horticulture, Research Organization for Agriculture and Food, BRIN, Cibinong, West Java, Indonesia.
- Research Center for Sustainable Industrial and Manufacturing System, Research Organization for Energy and Manufacture, BRIN, Tangerang Selatan, Banten, Indonesia.
- Research Center for Behavioral and Circular Economics, Research Organization for Governance, Economy, and Public Welfare, BRIN, Jakarta, Indonesia.
- Research Center for Food Technology and Processing, Research Organization for Agriculture and Food, BRIN, Cibinong, West Java, Indonesia.
ORCID-Profile: Hernani Hernani, Yogi Purna Rahardjo, Iceu Agustinisari, Tantry Eko Putri Mariastuty, Eko Bhakti Susetyo, Mochammad Jusuf Djafar, Puji Astuti, Heny Herawati, S Joni Munarso, Widaningrum Widaningrum
Zitieren
APA
Hernani, H., Rahardjo, Y. P., Agustinisari, I., Mariastuty, T. E. P., Susetyo, E. B., Djafar, M. J., Astuti, P., Herawati, H., Munarso, S. J., & Widaningrum, W. (2026). Characteristic of a Biodegradable Foam With Bagasse as a Filler. Scientifica, 2026(1). https://doi.org/10.1155/sci5/2944462
Vancouver
Hernani H, Rahardjo YP, Agustinisari I, Mariastuty TEP, Susetyo EB, Djafar MJ, et al. Characteristic of a Biodegradable Foam With Bagasse as a Filler. Scientifica. 2026;2026(1). doi:10.1155/sci5/2944462
BibTeX
@article{Hernani2026,
author = {Hernani, Hernani and Rahardjo, Yogi Purna and Agustinisari, Iceu and Mariastuty, Tantry Eko Putri and Susetyo, Eko Bhakti and Djafar, Mochammad Jusuf and Astuti, Puji and Herawati, Heny and Munarso, S Joni and Widaningrum, Widaningrum},
title = {Characteristic of a Biodegradable Foam With Bagasse as a Filler},
journal = {Scientifica},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/sci5/2944462}
}
EUVIMED