EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Matching Layer Loaded Absorber Using Screen‐Printed Resistive Meandering Square Ring and Line Structure With Wide‐Angle Stability

Shixing Yu, Tingli Rao, Yingmeng Zhang

International Journal of RF and Microwave Computer-Aided Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/mmce/1210893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of RF and Microwave Computer-Aided Engineering, online erschienen am 16.06.2026. Verfasst von Shixing Yu und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, we propose a broadband and wide‐angle stable absorber based on screen‐printing resistive film (SPRF) and impedance matching layer (IML). The proposed absorber consists of five layers: two IMLs, a lossy layer based on SPRF, a dielectric matching layer, and a metallic ground plane. Simulation and measurement results show that the reflection coefficient with | S 11 | less than −10 dB ranges from 4.5 to 19.3 GHz and 3.11 to 25.6GHz under normal incidence, respectively. Furthermore, the absorption band can maintain good stabilities under both TE and TM polarizations within 60° of oblique incidences. The measured and simulated results agree well with each other, verifying the design principle and manufacturing process. The proposed SPRF‐based and IML‐loaded absorber with improved angular stabilities can be applied in stealth radome and interference suppression in the future.

Förderung

  • China Postdoctoral Science Foundation

Zitieren

APA

Yu, S., Rao, T., & Zhang, Y. (2026). A Matching Layer Loaded Absorber Using Screen‐Printed Resistive Meandering Square Ring and Line Structure With Wide‐Angle Stability. International Journal of RF and Microwave Computer-Aided Engineering, 2026(1). https://doi.org/10.1155/mmce/1210893

Vancouver

Yu S, Rao T, Zhang Y. A Matching Layer Loaded Absorber Using Screen‐Printed Resistive Meandering Square Ring and Line Structure With Wide‐Angle Stability. International Journal of RF and Microwave Computer-Aided Engineering. 2026;2026(1). doi:10.1155/mmce/1210893

BibTeX
@article{Yu2026,
  author = {Yu, Shixing and Rao, Tingli and Zhang, Yingmeng},
  title = {A Matching Layer Loaded Absorber Using Screen‐Printed Resistive Meandering Square Ring and Line Structure With Wide‐Angle Stability},
  journal = {International Journal of RF and Microwave Computer-Aided Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/mmce/1210893}
}
Kostenlos starten →