Mechanical Analysis and Simulation of 3D‐Printed Femur Segments With Biomimetic Porosity
Material Design & Processing Communication · 2026-01 · 2026 (1)
DOI: 10.1155/mdp2/9349864 ↗Kurz gefasst
Fachartikel in der Zeitschrift Material Design & Processing Communication, online erschienen am 19.06.2026. Verfasst von Naser Kordani und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Mazandaran.
Abstract (Originalsprache)
Three‐dimensional (3D) printing has transformed medical engineering by enabling customized bone prostheses. This study designs and evaluates a 3D‐printed femur segment with manually crafted porosity mimicking natural bone tissue. Mechanical performance is assessed through compression testing, dynamic simulation, fatigue analysis, and crack propagation. Compression tests yielded average fracture force of 9.456 kN, stress of 11.76 MPa, strain of 8.68 mm, and energy of 42.6 kJ. The biomimetic porosity showed superior resistance compared to alternatives. Fatigue simulations indicated infinite life under in vivo loads. Crack simulations at failure sites showed stresses of 12.82 and 11.89 MPa. Findings highlight biomimetic designs′ potential in bone tissue engineering.
Förderung
- University of Mazandaran
Zitieren
APA
Kordani, N., Khodabandeh, M., Khalili, M. K., Nejadali, J., & Ghasempour, M. (2026). Mechanical Analysis and Simulation of 3D‐Printed Femur Segments With Biomimetic Porosity. Material Design & Processing Communication, 2026(1). https://doi.org/10.1155/mdp2/9349864
Vancouver
Kordani N, Khodabandeh M, Khalili MK, Nejadali J, Ghasempour M. Mechanical Analysis and Simulation of 3D‐Printed Femur Segments With Biomimetic Porosity. Material Design & Processing Communication. 2026;2026(1). doi:10.1155/mdp2/9349864
BibTeX
@article{Kordani2026,
author = {Kordani, Naser and Khodabandeh, Mohammad and Khalili, Mobina Khalil and Nejadali, Jafar and Ghasempour, Mehdi},
title = {Mechanical Analysis and Simulation of 3D‐Printed Femur Segments With Biomimetic Porosity},
journal = {Material Design & Processing Communication},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/mdp2/9349864}
}
EUVIMED