EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Heat Treatment on Phase Stability and Strength–Ductility Balance in ZrTiWMoVTaNb Septenary Refractory High‐Entropy Alloy

Mohammed Khazal Hussain, Moneer H. Tolephih, Nasri S. M. Namer, Masoud Atapour

Material Design & Processing Communication · 2026-01 · 2026 (1)

DOI: 10.1155/mdp2/5312823 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Material Design & Processing Communication, online erschienen am 31.07.2026. Verfasst von Mohammed Khazal Hussain und 3 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Refractory high‐entropy alloys (RHEAs) are promising candidates for structural applications in environments requiring excellent mechanical properties at elevated temperatures. In this study, the WTiZrTaVMoNb RHEA was fabricated via mechanical alloying (MA) for 32 h, then consolidated by spark plasma sintering (SPS) and subsequently annealed at 1000°C for 6 h, and the influence process conditions on the phases, microstructure, and mechanical properties was explored. The as‐sintered alloy exhibited a dominant BCC matrix accompanied by minor secondary intermetallic phases. After annealing, partial dissolution of these secondary phases into the BCC matrix occurred, leading to improved elemental homogeneity and enhanced phase stability. The as‐sintered alloy exhibited the highest hardness (822 Hv) and plasticity (19.6%), whereas annealing reduced hardness by approximately 18%, improved plasticity by about 33%, and increased the ultimate compressive strength to 1722 MPa. Zirconium played a key role in enhancing ductility by refining grain boundaries and stabilizing the microstructure, whereas its synergistic interaction with titanium facilitated dislocation motion and improved the alloy′s plastic deformation capacity. These results demonstrate that controlling heat treatment conditions is an effective approach to tailoring the phase constitution and microstructure of RHEAs, achieving an optimal balance between strength, ductility, and thermal stability, and enhancing their potential for high‐temperature structural applications such as gas turbine blades, thermal protection systems, and nuclear reactor walls.

Zitieren

APA

Hussain, M. K., Tolephih, M. H., Namer, N. S. M., & Atapour, M. (2026). Influence of Heat Treatment on Phase Stability and Strength–Ductility Balance in ZrTiWMoVTaNb Septenary Refractory High‐Entropy Alloy. Material Design & Processing Communication, 2026(1). https://doi.org/10.1155/mdp2/5312823

Vancouver

Hussain MK, Tolephih MH, Namer NSM, Atapour M. Influence of Heat Treatment on Phase Stability and Strength–Ductility Balance in ZrTiWMoVTaNb Septenary Refractory High‐Entropy Alloy. Material Design & Processing Communication. 2026;2026(1). doi:10.1155/mdp2/5312823

BibTeX
@article{Hussain2026,
  author = {Hussain, Mohammed Khazal and Tolephih, Moneer H. and Namer, Nasri S. M. and Atapour, Masoud},
  title = {Influence of Heat Treatment on Phase Stability and Strength–Ductility Balance in ZrTiWMoVTaNb Septenary Refractory High‐Entropy Alloy},
  journal = {Material Design & Processing Communication},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/mdp2/5312823}
}
Kostenlos starten →