EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Performance Evaluation of Clinker‐Free Pozzolan–Lime Binder Incorporating Sawdust Ash and Calcined Clays for Sustainable Construction

Odiwuor Vincent Onyango, Enos W. Wambu, Ayabei Kiplagat, Samuel Lutta, Onesmus Mulwa Munyao

Journal of Chemistry · 2026-01 · 2026 (1)

DOI: 10.1155/joch/2489898 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chemistry, online erschienen am 14.11.2026. Verfasst von Odiwuor Vincent Onyango und 4 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of clinker‐free binder systems is gaining attention as an alternative to conventional cement for nonstructural and compatibility‐based applications. However, the performance of lime‐based systems incorporating multiple pozzolanic materials remains insufficiently understood. This study aims to develop and evaluate a lime–pozzolan mortar incorporating sawdust ash (SDA) and metakaolin (MK) and to assess the influence of mix composition on mechanical and physical properties. Mortars were prepared using binary (lime–SDA, lime–MK) and ternary (lime–SDA–MK) blends at a constant binder:sand:water ratio and evaluated in terms of compressive strength, flexural strength, bulk density, water absorption, and electrical conductivity as an indirect indicator of pozzolanic reactivity. The physicochemical properties of the raw materials, including specific gravity and surface area, were also considered to interpret performance trends. The results show that the incorporation of SDA and MK significantly improves strength compared to the control lime mortar. Among the mixes, the ternary blend L‐S‐M‐1 (50% lime, 25% SDA, 25% MK) exhibited the best overall performance, achieving compressive strength of 4.96 MPa at 28 days and 7.12 MPa at 90 days, along with the lowest water absorption (4.31%) and relatively higher density among blended systems. Binary mixes showed contrasting behavior, with L‐MK outperforming L‐SDA, accompanied by lower water absorption and higher density. Increasing replacement levels beyond the optimum resulted in reduced strength and increased water absorption, associated with lower density which is consistent with higher porosity. Electrical conductivity measurements showed that both SDA and MK interacted with the calcium hydroxide solution, providing an indirect indication of their potential pozzolanic reactivity. The findings demonstrate that performance is governed by the interaction between mix composition and physical properties of the materials.

Zitieren

APA

Onyango, O. V., Wambu, E. W., Kiplagat, A., Lutta, S., & Munyao, O. M. (2026). Development and Performance Evaluation of Clinker‐Free Pozzolan–Lime Binder Incorporating Sawdust Ash and Calcined Clays for Sustainable Construction. Journal of Chemistry, 2026(1). https://doi.org/10.1155/joch/2489898

Vancouver

Onyango OV, Wambu EW, Kiplagat A, Lutta S, Munyao OM. Development and Performance Evaluation of Clinker‐Free Pozzolan–Lime Binder Incorporating Sawdust Ash and Calcined Clays for Sustainable Construction. Journal of Chemistry. 2026;2026(1). doi:10.1155/joch/2489898

BibTeX
@article{Onyango2026,
  author = {Onyango, Odiwuor Vincent and Wambu, Enos W. and Kiplagat, Ayabei and Lutta, Samuel and Munyao, Onesmus Mulwa},
  title = {Development and Performance Evaluation of Clinker‐Free Pozzolan–Lime Binder Incorporating Sawdust Ash and Calcined Clays for Sustainable Construction},
  journal = {Journal of Chemistry},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/joch/2489898}
}
Kostenlos starten →