EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Role of Calcination Temperature in Governing Physicochemical Properties and High‐Temperature Resistance of Lime–Calcined Clay Binders

Odiwuor Vincent Onyango, Juma Linus Okiri, John G. Gichuki

Journal of Chemistry · 2026-01 · 2026 (1)

DOI: 10.1155/joch/1646886 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chemistry, online erschienen am 11.10.2026. Verfasst von Odiwuor Vincent Onyango und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of lime–calcined clay binder systems is strongly influenced by calcination temperature, which governs their physicochemical properties, pozzolanic reactivity, and resistance to elevated temperatures. This study investigated the effect of calcination temperature (600, 700, and 800°C for 2 h) on the physicochemical characteristics and thermal resistance of lime–calcined clay mortars. Mortars were prepared using a 1:1 hydrated lime‐to‐calcined clay binder and cast into 40 × 40 × 160‐mm prism specimens. Physicochemical properties were evaluated by x‐ray fluorescence, x‐ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface area analysis, and electrical conductivity measurements. Mechanical performance was evaluated by 28‐day compressive strength, while thermal resistance was assessed from residual compressive strength and mass loss after exposure to 700°C for 2 h. Calcination temperature significantly influenced mineralogical transformation, surface characteristics, and pozzolanic reactivity. Clay calcined at 700°C (LMK700) exhibited the highest specific surface area (45.8 m 2 /g), the greatest reduction in electrical conductivity, and the highest degree of amorphization, indicating optimal pozzolanic activity. These characteristics promoted the formation of calcium silicate and calcium aluminate hydrates, resulting in the highest 28‐day compressive strength of 3.17 MPa. In contrast, incomplete activation at 600°C and structural reorganization at 800°C reduced reactivity and strength. Following thermal exposure at 700°C for 2 h, all mortars experienced reductions in compressive strength and mass. However, LMK700 exhibited the lowest degradation, with only 20% strength loss and 4% mass loss, demonstrating superior thermal stability attributed to its denser and more cohesive microstructure. These findings indicate that calcination at 700°C provides an optimal balance between amorphization and structural stability, resulting in enhanced physicochemical properties, improved mechanical performance, and superior resistance to high‐temperature exposure. The study also demonstrates the suitability of naturally occurring impure clays for producing sustainable lime‐based binders with improved thermal performance.

Zitieren

APA

Onyango, O. V., Okiri, J. L., & Gichuki, J. G. (2026). Role of Calcination Temperature in Governing Physicochemical Properties and High‐Temperature Resistance of Lime–Calcined Clay Binders. Journal of Chemistry, 2026(1). https://doi.org/10.1155/joch/1646886

Vancouver

Onyango OV, Okiri JL, Gichuki JG. Role of Calcination Temperature in Governing Physicochemical Properties and High‐Temperature Resistance of Lime–Calcined Clay Binders. Journal of Chemistry. 2026;2026(1). doi:10.1155/joch/1646886

BibTeX
@article{Onyango2026,
  author = {Onyango, Odiwuor Vincent and Okiri, Juma Linus and Gichuki, John G.},
  title = {Role of Calcination Temperature in Governing Physicochemical Properties and High‐Temperature Resistance of Lime–Calcined Clay Binders},
  journal = {Journal of Chemistry},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/joch/1646886}
}
Kostenlos starten →