EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Monitoring and Early Warning Method for Hydrogen‐Induced Cracking in E690 Steel Based on Resistance Corrosion Monitoring Principle

Peichang Deng, Shuo Yang, Junhao Zeng, Jingquan Wu, Jiezhen Hu, Fangming Wu, Limei Gan

Journal of Chemistry · 2026-01 · 2026 (1)

DOI: 10.1155/joch/1068663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chemistry, online erschienen am 18.11.2026. Verfasst von Peichang Deng und 6 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen‐induced cracking (HIC) is sudden and concealed, posing a high risk of economic loss and catastrophic accidents. Research into HIC monitoring methods is essential for mitigating these impacts. Based on the principle of resistance corrosion monitoring, this study integrates the offset‐compensated ohmic method and the four‐wire method to develop a high‐precision resistance corrosion monitoring technique. Using E690 steel as the research material, electrochemical hydrogen charging was performed to simulate the hydrogen charging process, and a slow strain rate test (SSRT) was conducted to mimic the cracking process of hydrogen‐charged materials. The developed high‐precision resistance corrosion monitoring method was then applied to monitor changes in electrical resistance. The results demonstrated that during the elastic deformation stage of the hydrogen‐charged E690 steel, the resistance ratio (K) ranged from 0.98 to 1.04, whereas during the plastic deformation stage in the SSRT process, this range expanded to 0.99–1.20. In addition, hydrogen diffused and accumulated in specific regions within the material, obstructing dislocation movement. The longer the hydrogen charging time, the stronger the obstruction, resulting in a greater magnitude of change in the K value (represented by the slope). The slope of the nonhydrogen‐charged specimen was 1.15, whereas the slopes were 1.59, 1.80, and 2.33 for the specimens hydrogen‐charged for 4, 24, and 48 h, respectively. The electrical resistance exhibited high sensitivity during the HIC corrosion process, enabling sensitive monitoring of HIC via resistance corrosion monitoring technology. The online monitoring method for HIC based on the principle of resistance corrosion monitoring provides a novel approach for the potential early warning of HIC.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Guangdong Province

Zitieren

APA

Deng, P., Yang, S., Zeng, J., Wu, J., Hu, J., Wu, F., & Gan, L. (2026). Monitoring and Early Warning Method for Hydrogen‐Induced Cracking in E690 Steel Based on Resistance Corrosion Monitoring Principle. Journal of Chemistry, 2026(1). https://doi.org/10.1155/joch/1068663

Vancouver

Deng P, Yang S, Zeng J, Wu J, Hu J, Wu F, et al. Monitoring and Early Warning Method for Hydrogen‐Induced Cracking in E690 Steel Based on Resistance Corrosion Monitoring Principle. Journal of Chemistry. 2026;2026(1). doi:10.1155/joch/1068663

BibTeX
@article{Deng2026,
  author = {Deng, Peichang and Yang, Shuo and Zeng, Junhao and Wu, Jingquan and Hu, Jiezhen and Wu, Fangming and Gan, Limei},
  title = {Monitoring and Early Warning Method for Hydrogen‐Induced Cracking in E690 Steel Based on Resistance Corrosion Monitoring Principle},
  journal = {Journal of Chemistry},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/joch/1068663}
}
Kostenlos starten →